clutch bleeding problem

I have a 90 300ZX that i haved replaced the master and slave cyls' I only get a little pressure from the clutch.
Question, I only have to two bleeding point right?
I haved bleeded from the slave and from the top breeding point. The fuel is full and no more bubbles are coming out during bleeding. With no luck.
What do you think i'm doing wrong.

 

does the TT also have the bleeding point on drivers side near the headlights?

 

pics for the clutch bleeding point

This is the bleeding point i used when i had to rebleed the clutch, hope this well help.
Cheers Joe
[/URL]
[/img]
[/URL]
[/img]

 

Use that point and the one on the slave, and if you have it the one on the master.

 

working now

thanks for the replys. I found the problem, when i was replacing the master cyl the line going to the cyl was not in proper seated in correctly. I quess the pressure was not there. Anyhow it working now. thanks again.
back ontheroadZZZZZZZ