i brought a set of xs power extractors for the non turbo z, the type they sell at uas, now i took em to a mechanic to install, and he said they cant go on because the exhaust sensor cant go on because of the location of the steering rack on one side!, any one had this problem? any way around it?
have you emailed john at uas to ask him ???????? if you didnt get them from uas ,i would say they sound like U.S spec headers
didnt buy them from john, brought them from some one who ha da 300 n/a then done a tt conversion, but they look exactly the same as the ones at uas
im guessing they are for a left hand drive car due to the location of the steering rack Any headers from the U.S wont fit our cars
Go to an exhaust shop! And get the sensor nut moved and just block the old one! Shouldnt cost to much and they will have the equipment to mod them if need be. Should take too much effort to move the sensor nut, and any good exhaust place will be able to do it! Mattb
Depends how far you want to go! Try Penrith City Mufflers/Exhaust http://www.yellowpages.com.au/onlin...b802e3|bdf3b07c7b305a6fc4c2700aaa7c8ee6&st=cs or speak to Greg at Sureflow Exhaust Ingleburn, who has the Drift Zed, http://www.yellowpages.com.au/onlin...f585|8414acf9fa40120e501daa1f4c974038&st=cs Or if you are further out west I use Mountain Mufflers in Katoomba - bloody good 02 47825022, MattB
im kinda inbetween ingleburn and katoomba, if the ingleburn place has a zedder i might head down there thanks mayte
Don't think it's that easy?? I think you'll find it's a little more than just moving the O2 sensor..........the steering arm on a RH drive car will most probably hit the collector on the driver side with a US set!!........it's only a matter of about 10mm or so but it's still enough to cause issues!
i don't know if mine had an xs power badge on them but the ones i had on my car were bought from UAS and required the o2 sensor plug hold to be moved
Here are some pic's of what i had to do with the right head side header after repositioning the O2 sensor,its not to hard to do.hope this will help. [/URL] [/img] [/URL] [/img] [/URL] [/img] [/URL] [/img] [/URL] [/img]