VIC NA headers, ECU, injectors, 55m throttle bodies

Got the below items up for grabs:

1. UAS stainless NA headers.

Originally bought for $450, RHD modified with O2 sensor bung in correct position. I'm not sure if UAS still sell them or not since I can't find it on the website anymore.

In great condition, steel now has a purple tinge to them.




There's lots of ebay junk from the US for LHD and modifying them cost $50 and conversion to AUD plus shipping it's a $300 exercise.

I'm asking $150.


2. Hitec ECU

Basically it's a socketed stock ECU with custom flash EPROM. Was used in JEDI-77's NA. Then it went into mine probably 6 years ago.

My car had the below bolt ons (very similar to Jedi's old car minus expensive head porting) and the ECU was re-tuned to suit by original tuner.

- Pod
- Larger 55mm throttles and match ported plenum
- Full 2.5" mandrel system from headers to mufflers
- 200cpsi cats
- Lighter billet flywheel w/ Nismo clutch

7500rpm rev limiter, 180KPH top speed limit removed (JDM cars)

Jedi's car still tops the NA list at 155rwkw. Mine came in at 147rwkw. Both are manual cars however the stock base ECU is an AUTO ECU. It will work in both manual and auto zeds.

Bolts straight in, you'll need the same mods and a healthy engine obviously if you want to replicate the results.

Bought for $350 back in the day. Asking $175.


3. Intake plenum with 55mm throttles and match porting done.

After $100 for it.


4. Set of 6 injectors in rail with good insulators and flow tested.

$50 including the fuel rail. If you just want a injector out of it, $10 ea.

 

Ill take the 55mm TB's mate. How much posted to 2147?

 

Pm sent re headers

Calling dibs on them

 

headers sold to josh.

postage quote PM'd to nem.

 

If SRB-2NV pulls out, I'll take his slot for the plenum + throttle bodies.

 

Throttle bodies already paid for. I didn't take the plenum though.

 

Nem FYI your payment has already cleared. Throttle bodies are officially sold.

I'll be taking the throttles off this weekend and posting them Monday as I've got a full day tomorrow at work.

ECU remaining. Anyone with bolt ons but no tune, come grab a proven chip.

 

Not interested in the plenum if it's not coming with the matching throttle bodies. GLWS.

 

Chipped ECU still available.

I'm surprised the below website is actually still up. Have a look if you need to reference where the ECU actually came from.

http://www.ttzed.com/products/produ...=471&page=1&title=ECU & Electronics&do=detail

http://www.ttzed.com/products/products_listing.cfm?cat=23&grouping=1&title=ECU & Electronics

 

Would you do $175 with postage included to 4305?

 

all be sold.

only some good OEM injectors left.

if anyone ever needs one and comes across this thread, chances are i still have them.

 

Hey, have you still got the na extractors?
Cheers