VIC Z32 2+0 NA targa 1990 manual stripped (no intirior trim)

Discussion in 'Car Parts for Sale or Wanted' started by Entyca, Mar 1, 2014.

  1. Entyca

    Entyca New Member

    Hi Guys,

    Unfortunately I'm moving and cant take my project car with me so its all gotta go!

    It's a Z32 2+0 NA targa 1990 manual

    All larger parts are pickup only in Vic

    I've stripped it right down to the chassis and pulled almost everything out except for the rear diff and subframe at the moment.

    All interior trim was in horrid condition, all of it crumbled in my hands when I removed it except for the dash.

    If you can think of any parts you want then drop me a message and I'll see what condition it is in.

    I will update with more parts as I sift through it.

    4 x Akuza wheels, 18" by 235 $150
    They are not in the best condition, I can send pics if you want but you can see the scuffs from this pic.
    [​IMG]

    Driver and passenger front quarter panel $30 each
    In good condition
    [​IMG]

    Rear lights and center piece $40 each
    They might need a polish.
    [​IMG]

    Targa roof $40 each.
    They have been stripped down for painting, still have the handle and trim but no plastic part around the handle
    [​IMG]
     
  2. Beau-s

    Beau-s New Member

    hey mate just wondering if those gaurds will fit a jap spec 2 x 2 at all??
    thanks
     
  3. Aaron

    Aaron New Member

    Left hand taillight + Power window box.

    hey mate do you have the small black box that goes in the drivers side door car, mines stuffed up. Also rear left tail light if it's not cracked. Delivered to NSW. :)
     
  4. gmbrezzo

    gmbrezzo Moderator

    Rear gearbox mount please, nsw 2828
     
  5. Entyca

    Entyca New Member

    Beau, not to sure mate.

    Aaron, whats the little black box? can you send me a pic? I'll go check out the tail light.
     
  6. Entyca

    Entyca New Member

    Gmbrezzo did you mean this?

    [​IMG]
     
  7. Aaron

    Aaron New Member

    Left hand taillight + Power window box.

    [​IMG]
     
  8. gmbrezzo

    gmbrezzo Moderator

    No. that is the cross member.
    Its the part that bolt to the middle of that and connects to the underside of the gearbox.
    Has rubber in the middle.

    Something like this:
    [​IMG]
     
  9. Beau-s

    Beau-s New Member

    Pm sent mate
     
  10. Entyca

    Entyca New Member

    gmbrezzo,

    I cant find it, from memory the rubber broke whilst being kicked about.

    If I find it I'll let you know.
     
  11. Entyca

    Entyca New Member

    Some more pics... again if you see anything in the pics that your interested in let me know, its alllllll gotta go asap.

    Rear bumper in good condition $50
    [​IMG]

    Front bumper sanded back for painting..... in good condition $50
    [​IMG]

    Steering column, shouldnt have any issues other then surface rust on the case $20
    [​IMG]

    Bonnet has some dints in it, a massive palm branch fell on it, its to hard to take a pic of. $20
    [​IMG]

    Front and rear break calipers, with a bit of cleaning and care they should be fine, $50 each caliper ono
    [​IMG]

    Front and rear stock sway bars, nothing wrong with them $20 each
    [​IMG]
    [​IMG]

    Headlights, no issues $20 each
    [​IMG]

    Cluster, 188000+KMs, I just scratched the front.... $10
    [​IMG]

    Left gauge, should work $40
    [​IMG]

    Indicator stalk $30
    [​IMG]
     
  12. Entyca

    Entyca New Member

    Wheels - sold
    full loam - sold
    indicator stalk - sold
     
  13. K1NGZ

    K1NGZ Head turner

    Do you have the 2+0 NA manual tail shaft?
     

Share This Page