Carbon Fiber Products! Center Bezel, Throttle Cable Covers and more

Based on photos, assuming these are a CF overlay for the existing panels. Have any side on pics, to see just how much of the existing panel they cover?

Also interesting in timing covers. Again, are they a CF overlay, or have you moulded the full cover?

 

The "throttle Cable cover" and "Timing belt cover" are brand new pieces made with CF, the dash bezel is made with original bezel and CF overlay.

These would be high temp resistant and UV protected.

Thanks.
Khalid.

 

you of all people should know they are completely different, I've seen two side by side and put in a dash IRL and can guarantee it!

 

I bought a LHD bezel and couldn't pick the difference...

Until I tried to install it. It has a slight lean and is out by about 15mm at the top right corner. If you forced it, it wouldn't sit flat and would have gaps all around

 

Okay guys, I was finally able to test fit a LHD CF bezel on my RHD TT, although I was able to fit it and the other items, such as clock and the a/c ducts fit quite well, the fitment of the bezel itself is off! If you can see closely, the sides, specially the left side of the bezel is way off and doesn't fit flush against the dash.......







But no issues, I will be producing these using for both LHD the RHD Zs!!

Thanks!
Khalid.

 

im keen for RHD one, with the 3 gauge din option.

 

Great Stuff, I've been holding out for genuine CF to suit RHD.
Fingers are crossed you may also contemplate doing the window switch encapsulating pieces, and even the shift knob too?

 

I will definitely grab a double din version any idea how long till it will be up for sale?

Abraham

 

im keen for RHD one, with the 3 gauge din option.

 

Working on those!!

Khalid.

 

Do you need me to send a RHD one to you?

 

Thanks misszen, I have access to one from a RHD TT!!

Khalid.

 

definately need to update your Z knowledge my good man..

the stereo surrounds are scewed towards the driver and the clocks are on alternate sides. likewise the lhd and rhd centre consoles are both also different, I have a lhd centre console from the states that doesnt quite line up with the stereo surround and the cutout for the gear stick is over to the left which makes it look... gay!

Just JiZZed!

might be keenly interested in timing belt covers and throttle cable covers.. need pics of them installed

 

Pending purchase of a Z, I would be interested in the RHD bezel, unsure of gauge mounts, though it looks pretty sexy

 

A company in England already makes these:

http://www.zcentre.co.uk/index.php?option=com_virtuemart&page=shop.browse&category_id=73&Itemid=7

 

They are not CF tho.

Id be in for these when made.

 

would be better if you didnt have to dig into your dash though
even if the gauges come forward a bit

 

the finishing strip above the stereo; is anyone able to apply this cf finish to one I supply or able to supply one already in cf ??
Pm me thanks