Rims SPECIAL - ENKEI - WORK - SSR -XXR

edit also prices on below if possible. Since the respray i want a new set of rims but to many to choose from, only price will decide i think hehe..

XXR 526 -
18x9 Black / SSC for front
18x10.5 Black / SSC for rear

XXR 026 -
18x8.5 Black for front
18x9.5 Black for rear

 

4 x 18" x 9.5" offset only + 35 = $906.00
In Black/Red Anodised finish
------------------------------

Question: will these rims fit a z at the front and rears? and if not is there alternative for width sizes that you can sell e.g. 18x9.5's then some 18x8's in the same deal?

 

Yes they will fit. We run 18" x 9.5" offset +35 on one of our Zed's. No rubbing. Sit pretty flush.

Here a pick of the +35's

http://www.aus300zx.com/forum/showthread.php?p=1089672&highlight=varrstoen#post1089672

 

Back soon with price update.

 

awesome mate

 

XXR have very limited offsets available.

XXR 521
18x10 for rear, all black with gold or orange rivets - offsets are 25 only
18x8.5 for front, all black with gold or orange rivets - offests are 25 or 35 only
Set of 4 delivered = AUD$790


XXR 526 -
18x9 Black / SSC for front - offsets only 25 or 35
18x10.5 Black / SSC for rear - offsets only 20
Set of 4 delivered = AUD $926.00


XXR don't have a 026 model, please clarify which set you had in mind.

 

fkn cheap! will those offsets be ok for our zeds? also dont mind having to roll guards, i wanna go 295s on the rear hehe

 

I'm assuming you mean no rubbing on the stock guards as they are? will they need to be rolled/pumped? and do you think they will fit with 245/40's on the front and 245/45's on the rear....if so i may be interested

 

Yeah. No rubbing on the stock guard as they are. We were running 255/35 all round. Havn't ran the 245 /40's or 45's on them. Based on the room, it looks OK but couldn't say for sure. Might be worth checking with the group to see if there is anyone running that size.

Are you running stock suspension and ride hight?

 

Cant say for sure mate.

We have no problems running a +35 offset on the 9.5" wide rims.

Mite pay to check with Kev. He's running 19x9.5+12 | 19x10.5+22 with rolled guards.

http://www.aus300zx.com/forum/showthread.php?p=1092561&highlight=varrstoen#post1092561

 

I'm running 235/40's on the front, but that's on an 18x8.5" +35 wheel
Running 265/35's on the rear on an 18x9.5 +35

 

Yes stock suspension and ride height...ok...might need to look into this a bit more...will let you know

 

PM's replied to

 

XXR 526 17x9 Chromium Black 4-100/4-114.3 [+35mm]
2.75" lip,



XXR 526 17x10 Chromium Black/SSR 4-100/4-114.3 [+20mm]
4.25" lip,
price please, have a client chasing rims, he needs the 4 studs

 

How much for VS XX in a 18x9.5 or 18x10 (+35-40)

Or BBS GT wheels again in the above...plain silver finishes would be awesome

 

Can you please clarify offset.

 

Whatever is available from +35 to a +40.

 

Check Spec sheet out. They have a few options close to those sizes.

http://www.workwheelsusa.com/media/wheels/26/75/VSXX_PDF.pdf

 

2x 18x10 +38 Disk A in a silver finish with polished lip.

 

Due to exchange rate, does that mean things should be cheaper?
I'm interested in VS-XX 19 inch but don't understand the disk chart.

I plan on running big brake kit.
Would 19 x 8.5JJ +17 & 19 x 9.5JJ +28 work? Or does that mean I'll have larger dish in the front