Hi all, Just a quick question. Is it possible to install a gauge cluster out of a turbo 300zx into a non-turbo and will it cause any issues? Thanks
Yep can confirm it's fine, I've got a mines TT cluster in mine. Just need to watch out for the wiring connectors as they change, a later model cluster won't fit in an earlier model car, etc.
A company in Brisbane fitted mine. They must have adapted the different connector. The boost guage doesn't work, wondering if that could be adapted to a volt meter? My fuel guage is a bit lazy. 3/4 full on guage is a full tank.
I would expect so. You can mix and match individual gauges within the clusters too. I swapped a early 260kpg aus spec speedo into a S2/S3 cluster with no problems.
You know that later model TT had guage clusters that looked like the Non Turbo. The boost guage was deleted. ..
When you know you have a full tank, lever the needle off with a fork and put it back pointing at the top notch or even just above it slightly. It's a bit of trial and error because when you run the fuel down you'll have to see where the needle sits and be mindful of when the fuel light comes on.