QLD Super mega 'off with the zeds' parts sale

Here is the so-far list.

Prefer not to post big/heavy/awkward stuff, but will do if someone really wants something. Can be neg on some prices, especially if packaging multiple items.

Engine:
2871 turbos - bolt on - very low kms (sub 2000) with oem manifolds - $1400 + aftermarket engine mounts (required) and modified piping/braided lines etc

2560 turbos - Z1 600r kit - low kms (about 7000) with oem manifolds (ported from memory will have to check) - $2200

OEM block, good cond, never overheated, knock sensor is still mint - not a melted puddle of plastic - $450

OEM heads good cond, manual cams, non leaky intake gears - $400

longblock OEM with 100thou service done, gates blue TB, waterpump/oil pump etc etc - low comp, needs rings. Perfect for building which is what I was going to do. Fancy blue and chrome/silver everywhere - $1000

UR pulley set - silver - $250

Big AMS oil cooler kit - $150

Wheels/Brakes/Suspension:
R34 gtt front calipers/rotors/pads/lines. Bolt on with only bolt holes needing drilled out to 14mm. Perfect street upgrade to 310mm rotors - $1000

Volk Racing C-Ultra 18x9 and 18x10 (very light with factory hub adapters from volk) KU36 front 595 rear (245 and 265) - $1000

Bob Jane 18's with rubber (one flat) - $500

JIC Magic quality Jap spec coilovers - $500

Tein HR - $800

Tuff adjustable FUCA's, thick threads - $150

Regular bok choi adj FUCA - new - think PZP etc - $150

Tuff adj tension rods - $120

Cusco adj tension rods - $150

Driveline:
NA subframe and custom 1 piece to suit NA diff/subframe swap into TT (2+2) - $700
TT Manual gearbox - $400

TT Manual gearbox - cleaned/detailled/painted - $500

TT subframe, rebuilt, new bushings, everything pulled apart, detailled and painted - $550

Exhaust:
3in 5bolt divorced dumps - $300

3in front pipes with highflow metal cats - $300

3in custom cat back (2+2), quad round tips, UAS 3in center muff, beautifully made - $800

Will do complete 5bolt, turbo back 3in system for 2+2 - $1250

Magnaflow 2.5in rear muffs quad exit (stubby round tip model), never used, 1 tip has small ding - $300

Interrior:
Custom front and rear seat set - red and black. Good cond. Minor scuff on drivers bolster - $650

Custom front and rear seat set - yellow and black embroided 'Z' logo. Mint cond like new - $800

zsport 300km TT cluster - $200

Various gauges of all kinds - to be listed

Various gauge holders, a-pillar, on dash and mickey mouse ear type - to be listed

Misc:
6 point bolt in cage 2+2 - $700

Full no2 system, purges etc. Everything except bottles for Z32 - $600

Genuine 2k tail light set - $350

OEM tail lights set good cond - $100

Gonzo Strosek wide body rear and sides never fitted - $500

2 din head unit with dvd etc - $150

Z1 selin twin intake elbows new - $85

Custom front indicator/duct combo suit S1 front bar - $100

Much much more to come. Most of the stuff is in near perfect condition, and most of us should know what most of it looks like. If you want pics of anything inparticular, feel free to ask.

email or PM questions michaelgray.planner@hotmail.com

 

Happy to drop the price, but you don't get the mounts, mani's and custom piping. Steveo has them on hold atm tho. You need to remember they have been re done to non china spec. And appriciate keeping stuff like this to PM

Happy to Neg on stuff by PM or email

 

Pm's replied.

Gents, I will have to confirm the 2din dvd brand, can't remember sorry.

Anti I can't confirm 100% manis are ported. I know they were attached at some stage. I'll have to remove and inspect. Also, I am willing to sell you the UAS stupid brace now if you still interested

Go on Procky, hide it

 

This is the head unit

and description from SammyK's sale thread. I never got the GPS working
"All in 1 DVD/GPS/Bluetooth/Digital TV unit
Does it all, also has SD card slot you can play music and movies from
Direct iPod connection with cable provided
Radio
Comes with ariels for Digital TV and GPS
I will provide GPS software
Multiple channel in's and out's for Amps, extra screens, reverse cameras etc.
6.2 inch screen

Only problem with unit is the usb doesn't work but it's not important

Bargin price of just $200 plus postage"

Yours for $150+post.

 

Here is the so-far list.

Prefer not to post big/heavy/awkward stuff, but will do if someone really wants something. Can be neg on some prices, especially if packaging multiple items.

Engine:
2871 turbos - bolt on - very low kms (sub 2000) with oem manifolds - $1400 + aftermarket engine mounts (required) and modified piping/braided lines etc on hold

2560 turbos - Z1 600r kit - low kms (about 7000) with oem manifolds (ported from memory will have to check) - $2200

OEM block, good cond, never overheated, knock sensor is still mint - not a melted puddle of plastic - $450

OEM heads good cond, manual cams, non leaky intake gears - $400

longblock OEM with 100thou service done, gates blue TB, waterpump/oil pump etc etc - low comp, needs rings. Perfect for building which is what I was going to do. Fancy blue and chrome/silver everywhere - $1000

UR pulley set - silver - $250

Big AMS oil cooler kit - $150

Wheels/Brakes/Suspension:
R34 gtt front calipers/rotors/pads/lines. Bolt on with only bolt holes needing drilled out to 14mm. Perfect street upgrade to 310mm rotors - $1000

AP racing big f off rear kit. Calipers 2piece rotors pads lines etc - $1700

Volk Racing C-Ultra 18x9 and 18x10 (very light with factory hub adapters from volk) KU36 front 595 rear (245 and 265) - $1000

Rodney Jane 18's with rubber (one flat) - $500


JIC Magic quality Jap spec coilovers - $500

Tein HR - $800

Tuff adjustable FUCA's, thick threads - $150

Regular bok choi adj FUCA - new - think PZP etc - $150

Tuff adj tension rods - $120

Cusco adj tension rods - $150

Driveline:
NA subframe and custom 1 piece to suit NA diff/subframe swap into TT (2+2) - $700
TT Manual gearbox - $400 - sold pending

TT Manual gearbox - cleaned/detailled/painted - $500 - sold pending

TT subframe, rebuilt, new bushings, everything pulled apart, detailled and painted - $550

Exhaust:
3in 5bolt divorced dumps - $300

3in front pipes with highflow metal cats - $300

3in custom cat back (2+2), quad round tips, UAS 3in center muff, beautifully made - $800

Will do complete 5bolt, turbo back 3in system for 2+2 - $1250

Magnaflow 2.5in rear muffs quad exit (stubby round tip model), , 1 tip has small ding - $300



Interrior:
Custom front and rear seat set - red and black. Good cond. Minor scuff on drivers bolster - $650

Custom front and rear seat set - yellow and black embroided 'Z' logo. Mint cond like new - $800


zsport 300km TT cluster - $200


Various gauges of all kinds - to be listed

Triple gauge holder - $200


Mickey mouse ears gauge hood - $100


Misc:
6 point bolt in cage 2+2 - $700

Full no2 system, purges etc. Everything except bottles for Z32 - $600

Genuine 2k tail light set - $350

OEM tail lights set good cond - $100

Gonzo Strosek wide body rear and sides never fitted - $500

2 din head unit with dvd etc - $150


Z1 selin twin intake elbows new - $85


Custom front indicator/duct combo suit S1 front bar - $100

Much much more to come. Most of the stuff is in near perfect condition, and most of us should know what most of it looks like. If you want pics of anything inparticular, feel free to ask.

Also found:

Yellow Jacket coilpacks - great upgrade, very few kms - less than 500kms. Work great - $400


single din cup holders! JDM yo, bought in person from Z32 zone. 2 cup holders and a tray for putting stuff in - $100 Bit dusty, mint condition




Doolz style twin intake - $40



Great near new condition rear glass 2+2 - $200 pickup only


Headlight inserts, again bought new from Z32zone, came in Nissan boxes but had to take them out to fit in luggage - $150


Ztoy modified 2k front bar in red - $400


email or PM questions michaelgray.planner@hotmail.com

 

I'll get some pics up when I can Abe. Not sure of brand, same style as the SZ/AMS stuff, with resonators removed and cats installed.

 

Sorry Jamie, out in the sticks atm will respond properly when I return to civilization