Locals preferred! Has done about 500k's since it's last machine. A quick skim and it's good to go with a new clutch. Is missing 1x locator dowel. I don't have any scales to weigh it but I'd estimate around 6kgs. This flywheel increases engine response and acceleration. The reason I'm selling is, it's not suited to what I will be doing with the car. I will be refitting the factory flywheel. This flywheel is not really suitable for drift or drag but great for circuit and street cars looking for quicker acceleration. $250
Yes but you will have to grind away at a small bit inside your NA belhousing and put a spacer on your starter
It's a TT flywheel so it might bit a bit too big to fit in the bellhousing. Might have to search on the differences.
+1 on this, i current run a TT Clutch in my NA, THEZED is correct. Grind your bellhousing, spacer for your starter motor and you will also need to get your clutch adjusted so you can make the grip point not be on the floor. but you can get your clutch adjusted at a mechanics for a little over $100. if not less if you know someone.