Need some help resetting Boost out of adjustment re people playing with it model Blitz Dual Solenoid SBC controllerl
I can email you the instruction book if you like they are a bit confusing to use at first To set boost: A - Turn the mode button to channel 1. " 1 " will appear. Push the mode button " 1 " will flash on the left. B - Push volume button until the " SET " appears on the right. Then turn volume knob to desired ratio. C - Repeat steps A and B to set channels 2 - 4. To set gain: 1- Unit must be in either channel 1, 2, 3, 4, or M. 2- Press mode button and hold for three seconds. The unit will beep. Channels 1, 2, 3, 4 and M should flash. 3- Turn the volume button to set gain. 4- Press mode button to exit.
That's how I adjust my Blitz EBC .When I got my Blitz controller the instruction book was in Japanese so I went on the Blitz web page and down loaded the English instruction manual.