AUS Wrecking Stock Motor

Hey guys, I'm wrecking the stock motor and have the following available

Turbos (good condition)
Dumps
Cams
Cam Covers
Polished CAS
Good series 1 intake cam gears
Exhaust cam gears
Upper Plenum
Lower Plenum
Throttle Bodies and Linkage
Spark plug guides
Oil pump appears to be new
Any oil and water hard lines

Nuts and bolts for anything mentioned above

Lemme know if you're after anything

 

Turbos (good condition) $150
Boost Control Solenoids $20
Dumps with heat shields and gaskets $40
Cams $100/set
Cam Covers $50/set
Polished CAS $100
Good series 1 intake cam gears $50/pair
Exhaust cam gears $20/pair
Throttle Bodies and Linkage $50
Spark plug guides $20/pair
Oil pump appears to be new $20
Any oil and water hard lines POA

 

Probably... $50 the set sound fair?

 

Ex cam covers sold, In cam covers dropped to $20/pair

As above exhaust cam covers sold to Shane, intake cam covers dropped to $20 for the pair

 

No probs I'll put it to one side and you can check it out whenever suits

 

Polished CAS

Pics of polished CAS





No it's not perfect, price has been dropped to $75 accordingly

 

As new Hydraulic Tensioner and idler pulleys (x2). These have done 0km -they were fitted to the engine as part of a 100k service only to find that the motor had low compression upon completion of the service.

$30 for all three.

 

Ross may have already pipped you via Facebook, just waiting for him to confirm

 

Bits of the stock motor starting to go, still have the following available

Dump pipes including heat shields $50
Exhaust manifolds with heat shields $50
Cams x 4 $40
Cam Covers (Intake only) $20
Good series 1 intake cam gears $40
Exhaust cam gears $20
Throttle Bodies and Linkage $50
Spark plug guides $20
Idle control units $100

 

Hi both gone sorry

 

Also gone -sorry!

 

Gone