Apparently the US one fits with minimal modification, please confirm with someone who has used one but i beleive it has been discussed on this temp forum so try search but US ones can be sourced from conceptzperformance.com edit: http://www.slvrcr.com/forums/showthread.php?t=862 Above post has details about wiring looms
This post really belongs in WANTED section and I'll move it there if you wish. Why not repair your old EFI loom by replacing &/or cleaning connectors?
efi loom by the time i buy all the connectors then get them solder on which the mechanic said would take about 6hrs x$65 per hr most of the connectors are corroded &the plastic is brittle what do you think,i only took the car there to fix the leaking coolant hose at the back of the block ,about a$1000 later they hit me with the wiring loom connectors are stuffed, i have already got this post in the wanted section.
Ok, I see yr post in WANTED, so I'll treat this as a TECH post ..... The quote is about right for a w/shop but it's a job easily undertaken yourself at a much lower cost than replacing the loom. 1. Cleaning all connectors as per TECH is time-consuming but costs very little. 2. You can replace the 10 injector-type connectors for about $80 total & 6 coil-pack connectors for a similar price. 3. CAS, PTU & TPS & other connectors are easily cleaned.
Yes, I used a coz L/H harness All up I think it cost about $500aud and the only hassle to fit it is that some of the plugs/connections must be rotated 180%. I might add that my long persistant hesitation vanished immediately the same day.! ps.Dont forget to remove the harness retainer,a real pita job.