Which Bulb???

Hi I have purchased ahid kit from O/S after reading the threads but I am being asked which bulb from the supplier they are both H3C

It also seems i cannot attach apiccy so here is the url for both pictures


(1) http://public.blu.livefilestore.com...Kd-_JJI-G_Lz63f5NBANgyJhvYqwzOMSQQ/H3C(1).jpg

(2) http://public.blu.livefilestore.com...OeWTrJdwu3zuqlZsUroqfiT8gjshaPr1Ew/H3C(2).jpg

Click on the URL and it will show picture of each I think its number 1 but I need someone with some bacjground in this to confiem

Thanks

dave

 

No 1. I haven't a clue what no 2 is for.

 

Thanks Anyone else want to help?

 

Nice put down, but I am hard to offend.

But what are you going to do if someone else posts up Try Box No 2? Go again for best two out of three? :rofl:

 

# 1:


#2:

 

pics dont work, but why not take the advice from a guy thats obviously been around zeds for a long standing time and a moderator at that dave ???!

sorry to hijak this thread, but can anyone confirm, aus spec headlights are H3 and j-specs are H3C ?

if so im stuffed, i have one of each :S

 

Mate just got some.H3 fitted straight in , only reason i got H3 not H3c is I knew they would fit and H3c cost more.I went 6000k.Cost $50.50 delivered dam cheap and now i can see at night on low beam.Amazing how street signs glow in the distance also.
Dave

 

Forgot to say to check i H3 will fit just poke a small srewdriver in the globe hole and if it goes in about 2 inch without hitting anything ( not 100% ) they will fit.H3 are longer globes than H3c and that the only difference as far as i know.

 

Sorry for the 3rd post but to answer another question mine is a j-spec.
Dave

 

The difference between H3 & H3C is that the H3 globe has a single wire going to the globe and it "earths" through the body of the light itself.
The H3C globe has two wires, as it DOES NOT "earth" through the body of the light.

Barry was correct in saying that the longer HID globe is the correct one to use in both HI & LOW beams when fitting an HID Kit in a Z32(it should also be obvious that the HID globes have a plastic base, and therefore CANNOT "earth" in the manner that an H3 globe does. So The same HID Kit is correct on either Auspec or J-spec fitment).

 

I can confirm this, I have one Jspec and one Aus Spec Headlight, and I bought a H3 HID kit. Both fit fine.

 

wtf they come in like 35w, 50w, 55w

im guessing this would make a difference, what would everyone else be buying?

 

55w 4300k H3 HIDS, end of.

 

Acutually I was thnaking you for replying I should have put the last bit on a second line.

 

Ok Thnaks all for the information. The supplier wants AUD 10 extra for number 1 and AUD 36 for number two. But enlightened by the information I will just go for the h3 Thanks again all

"Now I can see the light"

 

55w 8000k H3 HIDs.

here we come vicroads,

 

Don't do 8000, it looks wanky with a tint of green/purple.

 

8000k is the blue

and my cars full of wank, 40mm off the road, apexi Ti carbon exhaust angled and soon to have cage and +10 wheels lol..

edit : sending your pipes off this arvo sorry for the delay

 

normal halogens are 55W low beam (H3C JDM, H3 aussy) and 35W HID (H3 for both JDM and aussy like mentioned above) is more light than that. 55W will be only good for serious blind-the-F-out-of-a-pinging-trucky high beams. if you do night driving like mr zed x and myself the reflection from street signs will be blinding to you from 55W HIDs.

i have no idea wtf that #2 pic would be for.

H

 

I have 55w hids and they're fine, 300zx are so low that it doesnt matter.