Wheel they fit?

Discussion in 'Technical' started by grantd, Mar 27, 2008.

  1. grantd

    grantd Member

    Will these wheels fit my Z32? 18x8 Apec Apache wheels they are 5stud multi-fit. Thats the only details the seller can tell me :(

    [​IMG]

    GrantD
    grantd@gwengineparts.com.au
     
  2. Chrispy

    Chrispy Pretentious Upstart

    What's the car they are off? If it's Skyline (which it's not) or a Supra they will most likely have the coorect offset. By the look of the brakes its a Falcon or similar then the offests may be way off.
     
  3. Benny_C

    Benny_C About as subtle as...

    if the offsets fit a

    newish model falcon then it should fit because i think it was the AU onwards falcons use our stud pattern and offset. being a multifit you may be in luck as they are a common stud pattern & offset. like Chrispy said, Skyline, Soarer, Supra and newer Falcon rims will fit our Zed.
     
  4. brisz

    brisz Well-Known Member

    Ford AU2 rims .....

    fit the stud pattern but the wheel is VERY close to the stock brake calipers, havnt had any problems with hard street driving.

    [​IMG]
     
  5. Benny_C

    Benny_C About as subtle as...

    yes true...

    Most of the rims you buy purposely for a Zed these days are also particularly close to the front calipers also. Unfortunately it's just the geometry of the Zed brake/hub design. But even if it only just clears ... it's still clears and works non the less.

    The best thing grantd could do is a test fit and give it a spin to check clearance.
     
  6. Chad_

    Chad_ Well-Known Member

    msg renzed she has these wheels on her car ;)
     
  7. WazTTed

    WazTTed Grease Monkey

    DUDE... whats wrong with you man . FORD RIMS ON A ZED????????? im a bogan but thats just gross
     
  8. method

    method Active Member

    offsets might be printed on the inner rim - that would help greatly!
     

Share This Page