WA Help Req'd

I have busted my drivers side window and cannot for the life of me work out where the fault is. I spent 4 hours messing around today and got something going as it ticks (only once) every time the button is pressed.

Tomorrow i will be purchasing a multimeter to test the circuit fully, however i am now thinking its a problem with the motor and i tried for ages to remove it with no luck.

is there anyone with experience in this who could lend a hand? I offer cash or beer (simmooooo???)

 

if you need to borrow bits to replace and fault find you can bring it over

 

cheers mate might have to, just struggling to find how to unbolt it
most things i can work out but i'm way out of my league here

 

unbolting the window reg? it's probably like most cars where it's riveted in

 

its the actual motor i can't get out, the regulator i checked already and no bingo there

 

free all this weekend guys
preeeassseee

 

Sorry mate

Working this weekend. Well actually taking a sickie tomorrow but have to stay home to look after this missus. But I do have all the bits here to fix if you want.

 

Maybe it's the power window control box (black box ) that may be the problem. (Like those faulty tail light sensor black boxes) I can have a look for you maybe on Sunday? I'll bring my soldering iron... If that's not the problem we can struggle together to rip out the motor

 

$100 says its the bllack box, common fault.. pull the plug out and back in or pull the circut out and have a look, often some solder comes out.. re solder all the connections and she will work.

 

i took a look at that and couldn't find any dodgy solders but i guess heating them up again can't hurt

thanks for the offers guys will let you know how it goes, driving with no door card isn't so bad

 

yep... I didn't notice anything wrong with the solder joints in my taillight sensor black box. However just ran some hot new solder onto the joints and worked fine