Unique Auto Sports "X-System Resonator"

Discussion in 'For Sale by Businesses' started by rob260, May 14, 2009.

Thread Status:
Not open for further replies.
Page 4 of 10
  1. WazTTed

    WazTTed Grease Monkey

    whats the time frame rob. any 3" mufflers?
     
    WazTTed, May 20, 2009
    #61
  2. RENZED

    RENZED Girl in the black beast

    Stupid question..but what's the Aussie Magnaflow website? So I can find out dimensions on the mufflers
     
    RENZED, May 20, 2009
    #62
  3. Jinxed

    Jinxed Moderator

    3" stainless is available simmo....

    is that the time frame info youneeded simmo?

    lots of wa boys in on this so group shipping should be nice and cheap between all of us hehe
     
    Jinxed, May 20, 2009
    #63
  4. smifT

    smifT smifT

    I dont think there is one Renzed.. only distributors

    A big name exhaust shop told me not to borther with Magnaflow in Aust, and to use xForce instead
     
    smifT, May 20, 2009
    #64
  5. LOWZX

    LOWZX Banned

    LOWZX, May 20, 2009
    #65
  6. rob260

    rob260 Administrator Staff Member

    What are you on about???

    2.5" mild steel (cheapest option) has never been $325. The prices on John's website have been the same for as long as I have been a customer there and there has only ever been one other group buy which I ran and pricing was the same as it is now.
     
    rob260, May 20, 2009
    #66
  7. rob260

    rob260 Administrator Staff Member

    Renee, it's all there in my post in the main thread titled "mufflers"
     
    rob260, May 20, 2009
    #67
  8. rob260

    rob260 Administrator Staff Member

    Muffler Pricing

    Hey guys, pricing on the mufflers (part numbers mentioned in main thread post "mufflers") is $290 each, $580 or more assuming a minimum order five pairs.

    Freight on the mufflers is $50/pair to NSW, Melbourne, Adelaide or Brisbane.

    Freight everywhere else is $65/pair.

    Friehgt on a pair of mufflers and a centre muffler is $80 to NSW, Melbourne, Adelaide or Brisbane, or $95 everywhere else.

    Freight includes packing and insurance.
     
    rob260, May 20, 2009
    #68
  9. rob260

    rob260 Administrator Staff Member

    Timeframe is ASAP :)

    Re mufflers you should be able to check magnaflow and x force range at www.bestmufflers.com.au

    Or if not satisfied with off the shelf range UAS offer custom 3" mufflers, high entry low exit (so you tuck the muffler up nice and high and you don't get big muffler body hanging down low), option Y pipe for twin tips, or your choice of single tip. This is what I am using.
     
    rob260, May 20, 2009
    #69
  10. rob260

    rob260 Administrator Staff Member

    1. Jinxed 2.5" stainless steel---paid
    2. RENZED 2.5" stainless steel---paid
    3. Stef 2.5" stainless steel---paid
    4. Evz 2.5" mild steel ---paid
    5. Kabir 2.5" mild steel---paid
    6. Tenchi 3.0" stainless steel---paid
    7. dannytrev 3.0" stainless steel---paid
    8. torquesteer 3.0" stainless steel---paid
    9. LOWZX 2.5" stainless steel (for the t/t)
    10. LOWZX 2.5" stainless steel (for ZXTCY)
    11. ZEDSR4ME 3'' stainless steel
    12. WhiteNight 2.5" stainless steel
    13. Ascension 3.0" stainless steel
    14. DanZed 2.5" stainless steel---paid
    15. smift 2.5" stainless steel
     
    rob260, May 20, 2009
    #70
  11. RENZED

    RENZED Girl in the black beast

    Just got a few more questions..as to how my exhaust will work being an NA and all..

    - I've got the TTZ headers + gaskets + EGR bypass kit (at home)
    - The X-pipe I have asked for is a 2.5" stainless steel ($450)
    - The Racing Cats I have asked for is 2.5" stainless steel ($490 for both)
    - BUT..the 14805 mufflers have an inlet of 2.25", am I able to order the 2.5" inlet at the same price?

    I worked out the dimensions of the 14805s should fit through the hole on my rear bar, which we measured to be 20cm x 13.5cm..and the dimensions of the 14805s is 17.78cm x 8.89cm (to be precise)..

    So after this I guess all I have to do is take it to the exhaust shop for them to fit and add the extra bit of pipes:confused:
     
    RENZED, May 20, 2009
    #71
  12. 300ZXC

    300ZXC #TEAMROB

    From what I understand
    The inlet starts at 2.25 but tapers out to 2.5 close to the base of the muffler.
    [​IMG]
    like thaaaaaaat :)
    I spoke to an exhaust guy about em and that's what he told me :)
    That way it fits anywhere between 2.25 and 2.5 :D

    Also, Renee, would the 14807's fit through your rear bar? :D
    I R lookin at gettin the same bar as you have there :p
     
    Last edited: May 20, 2009
    300ZXC, May 20, 2009
    #72
  13. rob260

    rob260 Administrator Staff Member

    Magnaflow only make "street" series mufflers, including the 14805 and 14807 that are so popular here, with a 2.25" inlet. If you want to go larger you need to check out their "race" series which are 2.25" or 3" http://www.magnaflow.com/02product/racemufflers.asp?shape=5in.x8in. Oval

    No twin tips with the "race" series.

    It would be an easy job for your exhaust shop to fit the 2.25" inlet rears (so 14805 or 14807) to 2.5" pipes.

    That's it, your exhaust shop will be able to flange and weld and bend and put it all together.
     
    rob260, May 20, 2009
    #73
  14. zedboy

    zedboy Active Member

    Can i still get 2.5" stainless rob? I will be able to pick it up from UAS once they are available

    Thanks Matt
     
    zedboy, May 21, 2009
    #74
  15. RENZED

    RENZED Girl in the black beast

    Ahh ok..
    Well in that case put my order down for the following:
    - X-pipe 2.5" stainless steel ($450)
    - Racing Cats 2.5" stainless steel ($490 for both)
    - 14805 mufflers ($580 for both)

    Any idea how much I would be looking at for shipping to 3556? And did you need more money now, since I'm getting the above?

    I didn't work that out..but I thought I better play it safe and go the smaller tips, don't wanna risk it not fitting...I did mention the dimensions of the hole in my rear bar..so you could work out if it would fit or not..
     
    RENZED, May 21, 2009
    #75
  16. Zxryan

    Zxryan New Member

    nice job indeed
     
    Zxryan, May 21, 2009
    #76
  17. rob260

    rob260 Administrator Staff Member

    Yeah mate sure can, just need a deposit from you.
     
    rob260, May 21, 2009
    #77
  18. rob260

    rob260 Administrator Staff Member

    Yeah total deposit will need to add up to 50% of your order, so $225 plus $295 plus $290... $810 total.

    Freight I would thinkg $100 for the lot? Including packaging, insurance etc etc
     
    rob260, May 21, 2009
    #78
  19. rob260

    rob260 Administrator Staff Member

    I think below listing is up to date... there are quite a few unpaid orders, remember crew the sooner I have money in from everyone the sooner I can get the order in production.


    1. Jinxed 2.5" stainless---paid
    2. RENZED 2.5" stainless---2.5" cats---14805---paid
    3. Stef 2.5" stainless---paid
    4. Evz 2.5" mild---paid
    5. Kabir 2.5" mild---paid
    6. Tenchi 3.0" stainless---paid
    7. dannytrev 3.0" stainless---paid
    8. torquesteer 3.0" stainless---paid
    9. LOWZX 2.5" stainless (for the t/t)
    10. LOWZX 2.5" stainless (for ZXTCY)
    11. ZEDSR4ME 3'' stainless
    12. WhiteNight 2.5" stainless
    13. Ascension 3.0" stainless
    14. DanZed 2.5" stainless---paid
    15. smift 2.5" stainless
    16. zxryan 2.5" stainless---14807
    17. zedboy---2.5" stainless
     
    rob260, May 21, 2009
    #79
  20. yellow300zx

    yellow300zx Pimpin Ain't Easy

    Actually yeah it was, but I saw the website again, havent been there in a little while, at least not looking at the exhaust section and prices have gone up, nevermind though.
     
    yellow300zx, May 21, 2009
    #80
Page 4 of 10
Thread Status:
Not open for further replies.

Share This Page