WA TT motor and other bits (Need some room)

Discussion in 'Car Parts for Sale or Wanted' started by Kabir, Oct 12, 2010.

  1. Kabir

    Kabir Well-Known Member

    Attn Mods: Please delete the other thread EOI in non tech Z section.

    Since the project has settled down I need to clear some room. Some items are free and some has potential market. Before I take them and pile in shed if someone interested with them feel free to contact me so that I can post pics.

    1. Stock TT auto motor (no accessories, no turbos) overall good condition. no leak. number 6 cylnder has 125 compression (Cold). other cylinders are around145/155. I was running 13 psi boost. Good point is 100k service done 9k km ago. Receipt available. New water pump, timing belt, cooler hose, tensioner etc is already done. Inspection welcome. $700

    2. Stock auto turbos with manifold. no oil or water lines. No leaks or shaft play.
    Inspection welcome. $300
    3. Stock intercooler pipes (You need them to do NA to TT conversion). $50.00
    4. Two targa glass with locking mechanism (2 seater black) Free
    5. Manual heavy duty clutch with stock flywheel. (40% life left). Unknown brand. Inspection welcome. $100
    6. Two TT heads. Machine work has been done for bigger cam lobes (From my imported engine) Free
    7. Short block bored already to 90mm. Couldn't use the block because I went smaller dia pistons. You can rebore 90.5mm if you have some plan to use bigger dia pistons. $200
    8. Used Trust Greddy Grex piston set. Need new piston rings and conrods. Piston rings aren't availble anymore for these psitons.
    ($100)
    9. Stock valves (Free)
    10. Stock TT radiator (No leak) $80
    11. Stock TT shocks (Fronts are good condition, rears has small leak) $80
    12. Almost new gates timing belt and cometic head gasket 1.4mm. (Taken out from rebuilt engine) used for 8k km. $100 for both.
    13. Stock tension rods with new nissan bush. $180 pair

    More will be listed later. If there is any interest I can post pics. Offers welcome. Free items pickup only by friday 7.00pm.
     
  2. perth

    perth sik ****

    i will buy the engine today call me my number is 0430887712 txt me your address and what time you will be home cheers
     
  3. perth

    perth sik ****

    i will buy the heads and gaskets after i have a look at them
    i will also come have a look at your other stuff aswell
     
  4. perth

    perth sik ****

    pm sent
     
  5. Kabir

    Kabir Well-Known Member

    So no takers for free items. They will go to bin 2night. Offers welcome for other stuffs.
     
  6. pennyarvs

    pennyarvs New Member

    I might be needing the targa's locking mechanisms if they're still available and got no cracks...
     
  7. tom@pzp

    tom@pzp www.pzp.com.au

    is the short block bored out to suit the trust pistons?
     
  8. Kabir

    Kabir Well-Known Member

    yes. 90mm. Did only 8k. Cleaned out with acid at southside engine center. Great condition. Can post pics if interested.
     
  9. Kabir

    Kabir Well-Known Member

    Locking mechanism has been taken out from targas. Was thinking to keep them as spares if they are same for 2+2 targas. No cracks. Glasses are good to go someone local. Just can't justify throw them to bin. I don't have 2 seater car.
     
  10. SRB-2NV

    SRB-2NV #TEAMROB

    Pistons and HG shipped to 2147?
     
  11. tom@pzp

    tom@pzp www.pzp.com.au

    yeah post a pic or two. i don't understand....

    you've got 2nd hand pistons without any rings but the block has been used with these pistons.... did you pull it down for a re-ring or did you blow something up?
     
  12. Kabir

    Kabir Well-Known Member

    OK> These pistons came with my rebuilt engine from japan.
    I wanted to re-use them. But new rings for these piston aren't available anymore. Old rings are still with the pistons. But according to the builder you need new rings if you pull out the piston from block. So I went for another block and new piston set.

    Engine failed because bearings gave up for overheating being no oil in sump. Crank looks OK but probably new crank is the way to go. I don't have the con rods. call me to get more idea. I will take some pics later 2night.
     
  13. wetvelvet

    wetvelvet New Member

    I'll grab the Targa glasses if still avail....
     
  14. Kabir

    Kabir Well-Known Member

    Evz first in line. will let you know saturday if doesn't show up.
     
  15. GarlicSteaks

    GarlicSteaks Pulsating Member

    Did the engine end up selling?
     
  16. Kabir

    Kabir Well-Known Member

    So far two person is interested but didn't end up to check the engine yet.
     
  17. GarlicSteaks

    GarlicSteaks Pulsating Member

    ok, well could be interested, keep me posted if either of the others drop out!

    were there any probs prior to pulling?
     
  18. WazTTed

    WazTTed Grease Monkey

    "being no oil in sump"

    oh dude :eek:
     
  19. Kabir

    Kabir Well-Known Member

    blow by. somehow oil was mixing with intake air and burnt away. 5L oil disappeared in 8 weeks.
     
  20. Kabir

    Kabir Well-Known Member

    Not interested to hold for someone. Whoever gets first can take it away. Otherwise I will look for another Z with busted engine in near future for next project. No problem with the engine. No overheat or leaks. Wanted to push more power and more boost which will not be a good idea with this engine.
     

Share This Page