QLD TT engine + stock turbos, T25/28 turbos and some other bits

Discussion in 'Car Parts for Sale or Wanted' started by Adamness, Aug 15, 2010.

  1. Adamness

    Adamness Active Member

    I have for sale the original engine from my car. It is a series 1 manual TT engine, pulled to be replaced by my project engine.

    I drove through some water and the engine developed some bearing rattle afterwards so would suit someone wanting to rebuild. Despite the rattle the car still pulled hard and ran reliably.

    Engine comes complete with heads, cams and injectors (injectors would require a service as they are from the project engine and are quite dirty etc. Engine is partly dismantled still as seen in pictures. Comes with manifolds and manual turbos. I have water pipes and the timing belt upper covers - No lower cover, No plenum or accessories ( I do have an alternator but not sure if it works). Engine is missing a few bolts here and there for tappet covers etc, nothing a few trips to mitre 10 wont fix!

    Engine is drained of oil. The pic with the red tappet covers on it is how it will be posted, will tape up any holes. Can post at buyer expense, will put it on a tyre on a pallet and strap it down and wrap it up. $1000 + post

    Also have T25/28 hybrid turbos with .86 rear housings. I got these with the engine I bought off Horsepowerfreak, they have no brands or other marks cast in other than .86 on the exhaust housing. I ended up going with some hypergear high flowed stockies as I wanted less lag. Turbos seem to be in good condition, no guarantees though. Not sure how much they're worth so I'll start with $1000 + post

    Stock TT Flywheel - $50 + post

    Stock intecoolers with air guides, good condition - $50 + post

    Stock orange indicators - $10 + post

    I am located in Townsvile, Queensland.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    [​IMG]
    [​IMG]
     
  2. Adamness

    Adamness Active Member

    I'm open to offers too so don't be shy
     
  3. Adamness

    Adamness Active Member

    Oh I also have custom made 5 bolt dumps for the T25/28 turbos! I don't have any pics or know measurements tho..HAHA. I'll chuck them in with the turbos
     
  4. pennyarvs

    pennyarvs New Member

    Have you got some stock recircs?
     
  5. Adamness

    Adamness Active Member

    Sorry mate, no i dont.

     
  6. attila.Z

    attila.Z Awesome member

    might be interested in the turbos. Just going to do some research..
     
  7. Adamness

    Adamness Active Member

  8. Adamness

    Adamness Active Member

    Flywheel sold pending payment
     
  9. Adamness

    Adamness Active Member

    Price drop/update

    Engine with stock turbos - $800 + post

    T25/28 hybrid turbos + 5 bolt dumps - $800 + post (no water/oil lines)

    Stock TT Flywheel - SOLD

    Stock intecoolers with air guides, good condition - $50 + post

    Stock orange indicators - $10 + post
     
  10. awgazm

    awgazm Active Member

    hate to be a bastard but 800 for a ****ed engine?? without plenum and accesory's??
    and its still missing peices....
     
  11. Adamness

    Adamness Active Member

    I'm negotiable mate and basically just testing the waters to see how it goes.

    I have found the accessories but can't guarentee they work. Plenum can be easily sourced from this forum for $50-100 and the bolts that are missing are a few small ones from the rocker covers and a couple other things which could be easily sourced from a hardware store. - If I have trouble selling it how it is I'll reassemble it and try again.

    We can't auction stuff so I'm just seeing how it goes, if I don't get any interest I'll continue to drop the price like I have already!

    Thanks for your feedback, I'll take it as constructive critisicm :)

     
  12. Benzed

    Benzed Member

    Do you know what brand the turbos are?
     
  13. Adamness

    Adamness Active Member

    No I don't as they have no castings on them as seen in pictures. If you're really keen I can try contact Horsepower_Freak who I bought them off and see if he can give me any more info.

     
  14. Benzed

    Benzed Member

    $800 is a pretty sweet deal, but I want to be sure they're not chinese knock offs that will explode on first boost.

    Cheers
     
  15. Benny_C

    Benny_C About as subtle as...

    Hey buddy, got a member mate here in Toowoomba who doesn't get online much, but he's blown a turbo. Would you consider selling your 2x stock OEM turbos seperately from the engine at all?
     
  16. Adamness

    Adamness Active Member

    Well they were running in his car but other than that I can't guarentee anything as I havn't run them. Its unfortunate he did such a low boost run, he needed bigger injectors to up the boost to where the turbos would actually be spinning and producing some good power!

    http://www.aus300zx.com/forum/showthread.php?t=287108

    http://www.aus300zx.com/forum/showthread.php?t=291817
     
  17. Adamness

    Adamness Active Member

    Yeah I would seperate, however I don't guarentee anything with the turbos.
     
  18. Adamness

    Adamness Active Member

    Stock turbos are sold pending payment.

    Engine is still for sale, now at the price of $500 + post, still includes manifolds, will give what accessories I have (pretty sure i have aircon compresser, p/s pump and alternator) But with no guarentees on how well they work!
     
  19. Adamness

    Adamness Active Member

    Stock turbos sold. Come on people make me some offers?
     
  20. Adamness

    Adamness Active Member

    Price drop.

    $400 plus post for engine and $700 plus post for t25/28 turbos.
     

Share This Page