Has anyone seen any " Remote oil filter adaptors" for a VG30. All i come across are samwidge plates or the overpriced Relocation kits. For something so simple and commonly available on ebay, i have not come across any ebay copy sellers who can verify VG30 fitment. Seems kind of oddball if these sellers are selling these adaptors to suit 180sx 200sx and Skylines but dont know if a VG fits ? http://www.ebay.com.au/itm/231020245870?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 What size is the oiltree filter thread ... is it 3/4 ?
We use the exact same oil filter as skylines and SR20's so any on those will work, why do you need one though? Our filter is almost directly beside the sump plug. You will have to worry about ground clearance of your adaptor though.
Thanks for that info. I have a EPR 8 quart oilpan and a oil filter will not fit in the standard location.
Bsp is 14 tpi and unf is 16. So oil filter is 3/4 unf. so any kit with those specs will do. most relocation kits come with all the adapters you need just make sure one of the adapters have those specs. list of cars that use the z145a, there are more cars but this is what i came up with on short notice. FORD Corsair UA; HOLDEN Astra LB, LC, Commodore VL; NISSAN 300C 300ZX Nomad Pathfinder Patrol Petrol (90-98), Pintara (86-92) Pulsar N12, N15 Skyline** Sunny Terrano Urvan Van (77-86) ** Nissan Cefiro A31 RB20DET Nissan Cefiro A31 RB25DET Nissan Laurel C33 RB20DET Nissan Laurel C33 RB25DET Nissan Skyline HR31 RB20DET Nissan Skyline R31 RB20DET Nissan Skyline R31 RB25DET Nissan Skyline R32 RB20DET Nissan Skyline R33 RB25DET hope this lists helps.
So you actually need to replace the whole oil tree? I can't imagine a sandwich plate would free up much room compared to a z145a, I've never taken that off so not sure.
The oiltree is a-ok in place, but i have 72mm of vertical height for an oil filter to fit in. Remote Oil filter adaptors are about 50-70mm in height. I'll find one, its just that most of the cheap ones around are with a thread 20mm x 1.5 e.g....http://my.ebay.com/ws/eBayISAPI.dll?MyEbay&gbh=1
A bit pricey but would do the job http://www.gktech.com/index.php/oil-filter-relocation-block.html And you don't have to worry about chinese thread specs, just Aussie workmanship
I have both the relocation ends brand new and some braided line and AN fittings for this if you want them. PM me This was for the race car I don't have.