RDA Brake Rotors & Pads

Hi guys, it seems there are a few people needing new brakes so I have organised a buy with my RDA Rep.

You will have the option of delivery to your door at your cost or a central person in each state can collect from a nominated depot and there will be no freight charge

**All prices are for a PAIR of rotors**​

.

This will run for 3 weeks, cut off for orders will be Monday 17 Sept.​

The rotors are grouped in sizes... please ensure you order the correct size! I can supply any size rotors in this buy so if you want rotors for another car just email me caz@cazracing.com.au

​

909 stock TT Zed FRONT rotor 280mm , 30mm original thickness(ot)
RDA standard $128pair
RDA slotted:$188 pair
Turbogrooved/dimpled/gold passivated :$305.50 pair

907 stock NA Zed FRONT rotor 280mm , 26mm original thickness (most 89-91 models)
RDA standard $143pair
RDA slotted:$225 pair
Turbogrooved/dimpled/gold passivated :$347.50 pair

908 stock Zed rear rotor 297mm 16mm(ot)
RDA standard $125pair
RDA slotted:$190 pair
Turbogrooved/dimpled/gold passivated :$295 pair

928 R33GTR 324mm 30mm(ot) Front Brake Upgrade rotor (requires CAZ020caliper adaptor kit@$235 to fit)

**You must have minimum 17" rims to accomodate these larger rotors.**
RDA standard $263pair
RDA slotted:$328 pair
Turbogrooved/dimpled/gold passivated :$490 pair
*please read up on this style of brake upgrade before purchasing,there is brake pad overhang when using standard brake pads. This isnt known to cause any problems but be aware its part of this upgrade!

Brake Pads

EBC 'Greenstuff'
Front $189.00
Rear $179.00

Bendix Ultimates
Front $85.00
Rear $83.00

I also have Nissan Caliper Shim/hardware kits @ $61 for front and $74 for rear and Nissan Front Caliper rebuild/seals sets $99.00

 

I'll have a set of GTR rotors if they fit a R34 with brembos

 

Are those pad prices part of the GB only or are you able to do them at a later date?

 

GB prices vbevan

 

TT zed brakes

Hi Caz, My big question is, can I put TT rotors on an NA and will this give any improvement to my dismal braking. I have to upgrade in one way or another and I was thinking about going to the larger diameter rotor and caliper adapter, but since my zx is fully insured I dont want to stuff that up. Any advice in this area would be greatly appreciated. Thanks Andy

 

No, TT rotors will not fit on a NA. They are 4mm wider. You would have to get a set of TT calipers, or even better a set of Brembos.

To improve the stock system, change all fluids, get some good pads and braided line. I enjoy "spirited" driving thougth the mountains and have so far found the Z's brakes up to the task. I bought Brembos, just coz I could :zlove:

Caz, sorry, wont need the GTR rotors...

 

thanks

I might have to spend a bit more time/money on them then.Will probrably get a new set of pads and take it from there. Thanks Andy

 

ey caz can u put me down for some slotted rotors for the front of a TT...also when this cut of date reaches does it matter on the amount of people in this or is that the price that we will get it at for those in the gb

 

I'll take

the "908 stock Zed rear rotor 297mm" RDA slotted: thanks caz!

 

1 week left

Caz..

 

I'll take a set of 909 stock TT Zed FRONT rotor 280mm RDA slotted and Bendix Ultimate pads to suite.
Thanks Caz!

 

Can i put a deposite down and pay the rest abit down the track ? im a bit short on $$$ at the moment

 

Hi retrozx, Drop me a PM with what you were wanting and I will do my best to help you,
Caz..

 

Hi Caz
Can I please order the front and back shim kits?

 

They are in stock mantastic, no need to order them

 

ok great I would love a set for the front and rear please... I can pick them up if that suits you.

Thanks, Tim

 

No problem Tim, just let me know when 0411021823