But hell, I am, so what does it matter!I've got a parking and fog light out on the passeneger side, and the one screw I can find on the lens cover is stripped, but even if I can get the screw out, I'm not sure I can see how the lens comes off. Is it just this one screw and the lens sort of slides/levers out, or is there another way into that light assembly?Cheers all.Andrew
to change the bulb in the fog light, you first have to remove the indicator light by undoing the two screws toward the rear of the light. then the indicator light slides out frontways. you then have to reach in, and undo three bolts that secure the fog light to the re-inforcement bar. removing the bulb involves simply turning the bulb mounts on the back of the lights, not going in through the front lenses.
Firstly, the single screw is NOT stripped>> it is an adjustment screw to align the lights. Secondly, the whole light unit has to be removed to replace the globes. This is done by removing the corner light on that side, and reaching in through the opening to undo the speed-nuts on the rear of the fog light. Once the nuts are removed, you can pull the fog light forward out of the bar, remove the rear screws and access the globes. Put everything back in reverse order and don't forget to re-adjust your lights (using the screw on the front of the lens.)Cheers Lloyd :-Z
Ah. Actually I don't feel so stupid now I can't say I would've figured going through one set of lights to get to the others! Thanks guys.
Kewl!!! Ya finally bought a Zed dude, looks sweet. It was a long process for you but it appears to have been worth it. :-Z