NSW manual conversion; EXEDY, starter w/ loom, master, x-member, tailshaft, trim bits

I picked up a 300zx z32 NA 2+2 gearbox with accessories, I don't need the accessories so here they are up for grabs.
Offers are welcome, I'm in Sydney and pickup is most welcome


Starter motor with wiring loom $130
Front tailshaft with bearing $70
Gearbox X-member with ground strap: $35
Clutch master cylinder: $50
Exedy clutch kit: $150
Shifter metal body bracket and rubber trim (3 pieces): $70
(I took a picture with the shifter and bracket so that you can visualise exactly where these 3 bits go. *I need to keep the shifter/bracket*)


If you want to grab it all and put it towards a manual conversion let me know and I won't let things go separately

 

People have asked what else is needed for a full manual conversion kit:

- pedal
- flywheel
- rear tailshaft
- gearbox

I can see a few people having the parts you need right here right now, I can piece it together for you but I'm out of cash but I can help just ask... here are the direct links anyways:

gearbox + tailshaft (and diff)
http://www.aus300zx.com/forum/showthread.php?t=290737

pedal
http://www.aus300zx.com/forum/showthread.php?t=290823

flywheel
go lightweight



anything you need please ask :zlove:

 

If you're splitting I'd be interested in the Shifter metal body bracket and rubber trim (3 pieces): $70 and maybe Starter motor with wiring loom $130. Is the condition of the starter motor known? Its always good to have a spare.



I'm not in hard need for these bits, but would be nice to replace the rubber shifter trim when I eventually put everything back together. If someone wants to take it as a kit I'd rather it go to them.

I'm in Sydney area, is pickup ok? PM me if you want to sort something out

 

I was contacted a few times about taking the lot to put towards a manual conversion but they never came through so given the timeframe i've waited i'll be happy to separate...
Regarding the condition - all these parts were taking from a fresh Z crash (poor guy, at least he's not hurt), he was driving the car before the crash so everything was working, you know it hasn't been sitting around collecting dust or pulled off because they gave up the ghost. I'll be more than happy for you to inspect and do any tests you want


the Shifter metal body bracket and rubber trim (3 pieces) is sold pending payment to a nice fella in brissy

the Starter motor with wiring loom is available and pickup is not a problem so i'll shoot you a PM now

 

hi guys

these came off my N/A Aus Spec, everything was fine before and after the accident.
i never had any trouble with anything on the car mechanically.







what happened to the zed box conversion mate?

 

Thanks for the vouch James I appreciate it


Regarding my conversion - I dropped everything I got off you at the mechanic, he picked out what I would need for the conversion and the rest is now going back to the Z guys :zlove:

 

if the other buyer doesnt take the gearstick plate adapter and boot i will buy it..

i need one.. gfs going manual..

 

sorry they are on their way to a new owner now

 

bump

 

all offers welcome

 

hi mate,i have a 89 tt turbo automatic,will these parts fit a 2+2.i want to convert,i would be needing all, and the nuts and bolts, if you can still access them,how much you asking.......for what parts you have left?excluding the clutch master cylinder,thanks

 

ive got the rear section of the tailshaft if anyone is interested

 

i've been away but I'm back now some of the stuff is gone already so this is all of what's left, pick up any time from Parramatta/Sydney not a problem and can also pop down to the post office for the people further away

Starter motor with wiring loom $130
Gearbox X-member with ground strap: $35
Clutch master cylinder: $50


cheers :zlove:

 

PRICE DROPPED: take the lot for $200 (or seperate prices as below)

Starter motor with wiring loom $130
Gearbox X-member with ground strap: $35
Clutch master cylinder: $50

 

one more bump, throw your offers my way