Ok so i have a new set of LED winscreen nozzles on my car, but im looking for an accessable spot to wire the LED's to the parking lamps. Anyone have any ideas?
I'd wire them into the headlight loom of the nearest Hyundai Exel that I could find with a twin exhaust. You've probably got the idea that some of us don't like these sort of things. If you really want to do it check the online service manual in the tech section for a wiring diagram. Evan.
I have them on mine and i think they look fine but each to their own. Mine are just wired up to my headlights.
Yep Run 1 wire from either a parker or a headlight. If you use a headlight, your leds will go out when on high beam. Connect both +ives of the LEDs to this wire. Make sure you cover up any bare wires that you have exposed on this wire, or you will blow your headlight fuse and possibly cause additional damage to the headlight/parker circuit. You may also have to find a better earth point (-ive) than the bonnet itself as the hinges may not allow a good connection but see how you go. Remember that LEDs are polarised, so you can't mix up -ive and +ive. Put an inline fuse on the wire near your connection to +ive on the light that you decide to tap into. DISCLAIMER I am in no way encouraging RICE, but a legitimate Q was asked, so this is my attempt an an answer
Yes I am female and brave I do whatever I like to my Zed, not what people people think should be done
I put a set of these on my ex's Pulsar a few years ago, it's a pretty easy wiring set up, I made them with a separate switch. Perhaps hooking them up to the foggies would be a good idea.
I got them too!! Hey mate I got them on my zed too. They r pretty cool, a good way to get rid of those boring factory ones that look old faded. Anyway I got them wired up to a switch, I had them wired to the parks but the cops kept on pulling me over so , that is why I put a switch in. I can turn them on and off when I want. so you can fool some cops If I was you I would get them wired up to a switch. cheers Zedipated:zlove: