ive had this bar sitting for a while. bought it and never fitted it as i also came across a uas bar at the time and got that aswell.... today had the front bar off so i thought id give this one a try to show u guys pics of how it fits up to sell... overall quality looks pretty good. its thicker than the uas bar i have. bar is smooth and no ripples etc in the fibreglass.... this bar needs minor work and it will fit fairly nicely if not almost perfect. if you know how to use an orbital sander and a file then this is prob all you need to get this bar to fit up nicely. first these are some pics i took: ok and now for some explanation of labels. 1. this line need to be sanded straight, as you can see in the pic its a lil wavy. this is pretty much all it needs on this side. everything else on this side meets up and lines up nicely. 2. needs to be shaven. once it is shaven down a lil number 3 will be able to move up and fit nicely with the gaurd. number 4 will then also meet together nicely all it needs is 2 needs to be shaven a lil for the bar to move up a bit more.... you can see there is a bit of gap between the spotlights and the bar. should be able to minimise that once you do the above and move the bar more in and up... there is a tech also on how to make ur fogs sit further out to line up with the bar nicely... thats pretty much it. if i didnt buy the uas one when i saw it i would have been using this one 100%. there is no other reason for sale. $300 PICKUP ONLY
Chad , if you where closer, id get it in a heartbeat mate , just the bar i was after. postage would be a bit much but i think......bugger it. Good luck with the sale mate. Cheers Patrick
