goose honk killers in Aust?

Discussion in 'Non Technical' started by timothyds, Nov 20, 2015.

  1. timothyds

    timothyds Member

    hi all I'm looking for a local (in Aust) supplier of the goose honk killers, any link would be tops. thanks
     
    timothyds, Nov 20, 2015
    #1
  2. rob260

    rob260 Administrator Staff Member

    I'll have in stock in approx 1 week
     
    rob260, Nov 20, 2015
    #2
  3. mtopxsecret6

    mtopxsecret6 Member

    what is goose honk? and goose honk killer?
    bloody geese running wild..
     
    mtopxsecret6, Nov 21, 2015
    #3
  4. stumagoo

    stumagoo Active Member

    when one puts more than stock boost through the stock recirc valves at certain times (mine does it under gentle deceleration/easing of the throttle when up around 12 psi) the recircs literally honk it has something to do with the spring pressure and the boost leaking past the diaphragm. Mine does it very rarely so I am not worried.
     
    stumagoo, Nov 21, 2015
    #4
  5. rob260

    rob260 Administrator Staff Member

    It's not got anything to do with boost level -they actually leak when the difference between pressure above and below the diaphragm is minimal
     
    rob260, Nov 21, 2015
    #5
  6. scottyoz1962

    scottyoz1962 Active Member

    Sounds all Turkey to me :rolleyes:
     
    scottyoz1962, Nov 21, 2015
    #6
  7. stumagoo

    stumagoo Active Member

    point taken - I only mentioned it as mine only does it when I have gone above 10 psi in boost
     
    stumagoo, Nov 21, 2015
    #7
  8. Sketchy

    Sketchy Sick to the power of rad

    If I was planning on removing the factory blow off valves altogether I assume this would remove the problem completely?

    I have a pathological hatred of blow off valve noise plus its less hoses and lines in the engine bay.
     
    Sketchy, Nov 23, 2015
    #8
  9. mtopxsecret6

    mtopxsecret6 Member

    You will get turbo flutter if you remove the pressure release vales. Your only generating a new problem by doing this.
     
    mtopxsecret6, Nov 23, 2015
    #9

Share This Page