Not sure if this is in the correct section, if not could the moderators move it? Well after much chasing around and trying to get answers from members regarding the type of globe holder that goes into the small fitting that is in the side indicator lens,I have finally found a set from my local wreckers. I have been to a number of car parts places and they were of no help So I spent the day down at a wreckers here in SA called " U-pull-it" and have found that the globe holder from an early model diahatsu(?) fits the small globe section in the indicator/parker lens. I have tried even nissans re an Aus Z, and they were of no help. So if you are looking go and try the diahatsu's as they have the 3 pronged holders and they fit perfect. Globe is a T10. Hope this helps others.....................
Sorry cant tell you what model but is the small bubble shaped one, early model. I would say about late 80's to mid 90's.
I the J-spec z's there is a blank globe holder where the indicators are in the corner of the bar in the front. Some are open others are blanked, but there is nothing in there. Some relocate their parkers to there but the fitting is a 3 pronged 1, not like the standard 2 pronged ones found elsewhere on the car. Hope that helps you "jschrauwen"
No mate, same type T10 globes but the holders are 3-pronged parkers are 2 pronged........they will fall out........
