could any one please tell me work rims Specs are 18x9.5 +30 5/114.3 would they fit at the front i know they would at the rear cheers AK
It would fit but it would sit right on the guards. Too wide for the front, i would go anything over 9"
zedboy even if i have low profile tyres mate would they hit the guards tho or would i get away with that
Mine are 18x9" +30 with a 235/40/18 and it's fine no problems at all, prefer a 243/35 tyre though. If they clear the calipers and you like them then get them, as for tyre size on a 9.5" rim i would go a 245/35/18...any less than a 245 i think wouldn't be too safe on the front.
cheers mate ill get the tyre on um and try um out 1st b4 i buy um cause they arnt cheap, thanks for ur help
they will sit good. but not classed as "fitment" to me. could get a 9.5 + 15 easily, and that would be flush with the guard, with a bit of camber and a little poke, get some 9.5" + 0 x_X no one else in vic, has aggressive fitment.. quite sad.
Not sad at all, not all of us like forking out for new tyres every 10000km because aggressive camber has worn the inside tread to hell!
they should fit fine im running 19 x 8.5 +13 and all i really did was roll the inside of the guards so if that was a 9.5 wheel it would be +24 off set so your still 6 mm inside that so i doubt you would even have to touch the guards . All my wheels sit at correct alignment angles to . The back is actually more of a challenge fitting 19x 9.5 +15 actually takes alot of work to clear the guards
