few questions, is it hard to fit the underdrive crank pulley? what will i have to remove in order to get to the pulley? and how do i go about taking off the old one and putting on the new one? is it as simple as undoing the nut, putting the new pulley on and doing the nut bak up? PLEASE HELP!! cheers
Yeah that's pretty much it... Remove the radiator shroud or the whole radiator for access, good oportunity to change the coolant. Loosen off all the drive belts and remove. Undo the crank bolt, you will need a breaker bar or rattle gun, sucks if you have an auto Get a puller from Supercheap, pull the old pulley off, put the UDP on. Install new shorter belts and replace the rad/shroud and your done. Don't forget coolant.
