WA ENGINE OVERHAUL KIT (ACL)

AY GUYS JUST WONDERING IF THIS A GOOD PRICE FOR A REBUILD KIT.
i know someone at Coventries automotive that tries to give me good deals.

rebuild kit consists of
6MKRY9602-1.00 -ACL forged Piston kit & rings, 1mm oversize.
4M2737H-STD -ACL Main bearings, standard size
6B2390H-STD -ACL Con rod bearings, standard size
FS2100GTR -ACL Full gasket set, includes multi layered steel head . gasket (the race/perfomance head gaskets).

basically whole engine overhaul kit.
$1700+

 

seems alright have a look at coz's website to checkout a comparative prices

Ryan

 

i would be carefull man . i used 2 work for covs. there warehouses are full of nincumpoops. check and double check the part numbers you are ordering and the parts you recieve !

 

yea cheers heaps will do. do yous know anyone else that does overhaul kits for zeds

 

yea there has been a few parts ive brought and part numbers are different ay, they can be pricks but usually there ok

 

this may be a little different .

i think you should take your engine apart first and see how it looks inside ,
you may need to hone and bore it out first, ( in case of any damage )

you are buying something for an engine by assuming your engine ( bottom end ) is 100% it may be , but no always the case .

as far as price goes seems OK to me
just a heads up

 

looks like a good rebuild kit to me. the pistons and rings are 1mm oversize which is max oversize. Some people recommend not going that much over unless you need to but it pretty much means that these pistons will suit any block, even if it has got bore damage.

crank and rod bearings are STD, 9 out of 10 engines i do i use std bearings, the cranks wear well on these adn the crank is factory hardened so you dont really want to grind it anyway

 

A block can be bored to say 0.7 or 0.8mm to be able to see if will take 1mm piston before purchase.

 

Ive had a heap of 1mm over VG30's

 

Sorry, was not real clear there. What I mean is a few light passes with the boring bar will tell if any damage will be taken out with a 1mm bore, for example if it has badly picked up a piston or broken a skirt.

 

Ah i see what you mean, good point. I thought you meant wall thickness

 

No I havent had any issues with wall thickness as yet. Some have reported it, but I have not seen any evidence to back it up.