Cruise control fitted

Discussion in 'Non Technical' started by deZed, Oct 23, 2008.

  1. deZed

    deZed Member

    After a lot of searching and buying components off different forum members, I have finally finished installing cruise control to my NA manual Zed.

    Who's a happy boy then? I am. :D:D
     
  2. Scott Martine

    Scott Martine Rollin on DUB's

    /pat
     
  3. aazn

    aazn New Member

    it it installed like a standard unit (oem style) or is it a aftermarket unit and installed so it looks semi-bodge
     
  4. deZed

    deZed Member

    OEM

    Fitted as OEM, so it all looks nice and standard
     
  5. hukie90

    hukie90 300TTorrr?

    nice man, how much was it in parts? and was it hard to do? cheers mate :)

     
  6. deZed

    deZed Member

    Cost

    It cost about $350 in parts off different members, it would have cost less if it was all from one wreck.
    Not that difficult after loads of research, reading circuit diagrams and doing the diagnostics prior to a road trial.
    Just took a while to understand how it all works
     
  7. Stef

    Stef Active Member

    Good stuff Paul.

    Now that you know the cruise control inside out, you are welcome to come and fix my 2 non working one's.

    I tried to debug it on the convertible, and suspect a problem with the switches on the pedals. I nearly broke my back trying to get in under the dash.

     
  8. deZed

    deZed Member

    No problem Stef

    The diagnosis for the cruise control is on pages EL-99 to EL112 in the electrical section of the manual.
    I installed and checked the wiring for the pedal switches while I had the gauge cluster out, saved having to go to the chiropractor.
    If you still have problems, I can drop over some time and have a look.
     

Share This Page