need help...(checked forums but couldnt find a suitable solution) speedo and odometer died from my cluster but power steering is still good. pulled my cluster and checked the solder...all good from that end. checked the voltage/connections/wires etc to see if its getting power...all good there aswell. bought another cluster off of 'PennyArvs' and checked that, but it had exactly the same issue. tried even wiring a separate line to get the speedo going again but no luck. Is is possible that the replacement cluster is ****ed aswell or is there something else i can do... need help cause Tom at PZP is out of ideas.
Maybe the Speed Sensor on the gearbox is stuffed(no signal to the speedo - no reading for Odometer or Speedo)?
Have you recently done any work with the consult port like wiring in a switch or left a short in it ? And does your "check engine" light come on with ignition ?
Don't know if this could be your problem but worth a look. On the rear of the speedo board is a resistor ( thinking maybe R9 or R10 written on board ). It gets a dry soldered joint that stops the speedo from working ( don't know about odometer though ) but maybe worth a look. When i got my Z a couple of years ago the speedo would not work or read 320 km every now and then. Someone posted up a great thread with photos so do a search. Cheers Dave
yea checked the solder joints aswell. that was my first thought originally. any more ideas guys cause its killing me hahahahah