Hey just a quik question just about to swap my stock side indicators for a new set of clear ones But just a bit worried about how they come off. The new ones appear to have a small clip on the left side and was wondering if this was the same for the stock ones??? Just don't want to destroy the stock ones.
yep stockies are the same as well....just push the indicator forwards towards the front on the car and pull the back of the indicator out just do reverese when installing new ones, put the clip side in first then the rear and pull the indicator back to fit snug in place cheers
I found with the clear sides that the plugs for the bulbs wouldnt fit properly. The little tabs were different to what the clear indicator covers were. So I had to demel some new holes.
yeh if u mean the nismo clear sides ull havta make an extra hole for it to fit...thats what i had to do, not that hard unless u get the specific wiring loom for the indicators!!
you'll have a hard time trying to squeeze them out...best thing to do it take a couple of screws off from the wheel plastic guard...squeeze your hand in there and press in the clip and remove the light.... ive damaged paint doing it from the front...