Chrispy's Last Garage Sale Incl. Performance Bits!

Right. Time to clear out all my Z stuff, including performance goodies...

Normal Z Spares:

Stock series 1 VVT intake cam sprockets. I bought these with my spare set of heads and appear to be in good working order, no loose bits. Don't include the little covers and screws. $80 for the pair.

Stock exhaust cam gears, suit both series 1 & 2. Perfect for blinging up while your car stays on the road. 1 set, $40 per pair

Stock NA fuel pump. Was working fine, but got a Walbro in the recent GB. Fuel pump only (the metal bit) no rubber casings, no fuel level sender, no filter $20

NA FPCU, one good one, one which doesn't prime when the ignition is turned on, which I reckon is repairable with some cleve soldering. $40 for the good one, dodgy one for cost of postage. Apparantly these are around $900 from Nissan! Good to have a spare as these can fail at any time.

Full set of stock valve springs, look fine, haven't checked tolerances. $20

Stock NA radiator. No leaks, tanks in good condition, no rad cap. Includes shrowd but no lower bit. $100, but will swap for a TT shrowd in good cond with the lower bit.

TT Heads from a Auto '89 model. I was going to rebuild these for my NA. The TT heads have larger ports than the NA, so a good basis to start porting. They will need a deck, as there are some light scratches on the faces. These are completely stripped and have been chemically cleaned. Also includes spring retainers, but no valves, lifters or springs. $250 the pair (will not post)

Full set of lifters from an '89 TT. Haven't checked tolerances, but all the oil has drained from them. Good for rebuilding, none of them have seized. $50 the lot.

Set of piston rings to suit stock sized pistons. Taken out of box for a look, but not out of plastic. Will suit NA or TT (same Nissan part numbers in workshop manual, THEY ARE NOT GENUINE NISSAN) $100

Full set of Head Gaskets and head rebuild kit. All gaskets needed to take the head off and overhaul, includes valve oil seals and plennum gaskets lots of other ones too. Only has 1 throttle gasket for some reason (Yes, it's for a Z32 and not a Z31). I have taken these out of the package to have a look at too. THEY ARE NOT GENUINE NISSAN $250

Upper plennum, no throttles, no IACV, no balance tube, just the plennum. It's been half polished, as I gave up after a couple of days. Real prick of a job. Would only take a quick clean up before powdercoating to get a real nice finish. You could also finnish polishing it if you where crazy and like getting ally dust up your nose. $120, or $150 with lower plennum. I'd rather not post as it's a stupid shape...

Lower Plennum, no injectors, a bit dirty (grease and engine filth) $50, or $150 with upper plennum

--------------------------------------------------------------------------

The Good Stuff!

Sorry, my JUN adjustable cam gears have found a new deserving home...

KYB height and damper adjustable rear shocks with pillowball mounts. Stock springs will NOT fit. There still nice and stiff, and the adjuster does alter the stiffness. These are incredably rare, so much so that the KYB rep had never seen a set. Ever. I have no need for them now. $80 for the pair. Most probably sold

JUN Lightweight flywheel to suit an NA. Chromoly, about 6.8kg's. Better than Ally IMO, takes the heat better and it HEAPS stronger. This is still on it's way from Jap-Land, but should be here soon. About $450ish as I don't know what postage will cost in total. I will open this when I get it, can't resist

JUN Heavy duty clutch pivot. Good to change when you change your clutch (or flywheel ), coz it's a pain to take your gearbox off again to replace a really cheap part... This is a peice of art, if I don't sell it it's going on my desk at work. Beautifuly machined. $50 delivered

Full set of Splitfires, from the recent GB. Also haven't got these yet. $520 delivered.


Stuff I don't want to sell, but have stuck a price on them I could let them go for

Brembos Off a R33 GTR V-Spec. Their black, and must have had brake fluid on them as the clear coat is coming off in places. Nothing some paint and new stickers couldn't fix. These are quite large and suit 324mmx30mm rotors. They will bolt straight up to the Z. Includes brake pads that look practically new, they have a baby blue back on them, but don't know what they are. $1200 (I don't REALLY want to sell them)

GReddy E-Manage Ultimate (the good one, not the silly blue one). Bought this off Fate ages ago. It's very shiny and has more features than most standalone engine management systems (including individual injector adjustment, launch control, speed/boost/stall defender etc. Does not include loom as it's already installed in my Z, and it would be too much of a pain to remove. If you want the loom, just buy my car . New looms can be purchased through Greenline, Autobarn and several other Jap parts suppliers. Includes software and oringal box with genuine manuals (well read ) $550

Alpine IVA-D310 Touch Screen DVD Player 7" motorised screen single DIN. Pretty nifty gizmo, with so many inputs and outputs they come with their own box with 6 million wires It appears to be an american one and only plays NTSC DVD's from region 1 and region ALL. This is an '05 model (looks the same as the new ones to me) and was owned by a mate since new, he had it installed in his Skyline for 3 months before turning it into a 700hp RB30/26 racecar. Includes Nissan plugs, so it clips straight in. $1100

PWR 42mm Twinpass Radiator. To suit a TT, but includes brackets to fit a NA. Check out the Radiator GB thread for piccies installed in a NA, doesn't include thermo. This is on my car at the moment, so you'll ahve to gove me time to change it over if you want it. $500



Or you could buy everything for the low, low price of $5500


All prices don't include delivery (except where noted), but if you come on the Brissy cruises I'll bring them to the next one. All prices are guestimates and if you think there a rip off let me know. I reserve the right to change my mind at anytime and remove some things from sale. Theres is probably some more stuff in my shed which I will add when I find it (all of the above is in my bedroom, hows that for dedication!)

If you want piccies let me know. I have dialup and it's a pain to upload as it takes friggin' ages!

 

I'll take the brembos, I get paid on Sept 6 if you are ok with that? You have any pics?

 

That was quick! I promised Rob260 first dibs, but I'll have to really think about it, don't really want to sell them. I'll e-mail piccies to you tomorrow.

 

lol, np if Rob wants them. Are these the ones that were for sale on the SAU forum?

 

No, I got these off E-bay last week, only arrived today! The ones on SAU where R34/Z33's which require some minor mods to fit. I only have the fronts too, no rears

 

good to know for future ref if Rob takes them. So only the R33 will fit up straight hey?

 

The R32 GTRV-spec, the R33GTR & the R33GTR V-spec all have the same brembos, which all bolts straight up to the Z32. The R34 GTR and Z33 Track have the same size caliper but the bolt holes are a different size so they would have to be drilled out (or the caliper mounts on the suspension would have to be drilled, can't remember which) Now you know...

 

JUN Heavy duty clutch pivot

Dibs

Cheers
Mark

 

The Smurf has the clutch pivot.

Vbevan, Rob said he is in 100% if I end up selling the Brembos. I suggest you look on e-bay for a while, doesn't take long for a set to pop up.

Here are some piccies anyway (I just like showing off )





And to give you an idea just how big they are...


These are bigger than stock, considerably lighter than stock and you can pretend that you are driving a Ferrari!

 

No prob. Were yours off R33 GT-R? Can you do me a huge favour and let me know their size? Even just length and height. I might get some but when I do I want to be sure they fit. Or do you know somewhere that has their dimensions?

 

Yeah, off a R33.

Overall length: 230mm
Overall Depth: 110mm
Distance between bolt holes: 100mm

Congrats on picking up the full set earlier!

 

Emanage ultimate

So no loom for it hey?? hmmmm ill have to see how much one costs, any ideas? If its not an arm and a leg ill be interested

 

http://www.nengun.com/trust-greddy/e-manage-ultimate

Sell them for $130 delivered. Plus check UAS and the other usual suspects.

 

Oh yeah, forgot to add the E-Manage is set up to run on a Zed (TT or NA). No mucking about inside it for this one. I have had it working in my car for a week or so. I didn't have it tuned and it appears that it has a self inflicted safety mode which takes timing out and adds fuel. I was getting 300k's per tank on the highway. So make sure you tune it!

 

300km? really? + the way i drive i would be scared to work out the mileage if i didnt get it tuned.

Ill sleep on it tonight then......and ask the wife if its ok

Jay

 

E-Manage Sold!
Splitfires Sold!
Clutch Pivot Sold!
Brembo's Sold if I can bare to part with them...

I'm suprised no one has snapped up the plennums yet...

 

Here are some piccies...

I am negotiable on price as I have no futher need for this stuff. Grab it before the cruise and you don't have to pay postage as I can bring it to you!

FPCU's


Head Rebuild Kit


Cam Gears


Heads

 

Lifters and retainers, retainers come with the heads.

NA Fuel pump


Plennums


NA Radiator


Stock Sized rings

 

Upper plennum and PWR Radiator sold!

Make an offer guys I want this stuff gone!

 

How did you want payment made?

....