CazRacing Specials

Thermal Flex Silicone vacc line Black, Blue or Red.
4mm is $5.00mtr
6mm is $6.00mtr
8mm is $8.00mtr

Thermal Flex reinforced turbo hose 18? length, cut your own couplers/joiners Black, Red or Blue.
2? is $43, 2.5?is $48, 3?is $57.

Samco Sport silicone TT top radiator hose $108ea (3 x black , 3x blue , 1 x red)


SFS silicone top radiator hose TT $79 1 yellow only

Z1 NA silicone top radiator hose $79 (1 red, 2 blue & 2 black)

Z1 Temp sensor adaptors 1/8" NPT (27) thread pitch $41.00ea

Autometer polished Temp sensor adaptor kit $69.00


Brakes
RDA908G Turbogrooved, Gold passivated Rear rotors $280 pair (1 Pair)pic below


RDA909 standard TT front rotors $120.00 pair (1 pair )

Polished 'Z' Battery Tie down $92 (3 available) 'Z' is white but can easily be coloured as seen in the pic.


Nissan Nose panel hardware, full set NEW! $159 (1 only)


Genuine Stillen Urethane Nose panel $175.00 (1only)


Please email me your postcode for post cost caz@cazracing.com.au

** Double and triple gauge full A-Pillars have arrived! limited numers available.

 

** Double and triple gauge full A-Pillars have arrived! limited numers available

prices caz ??

 

is that for a water temp gauge? What else is needed to fit? Any cutting/trimming/shortening of hoses to fit it??
what about oil temp/preasure gauges, got anything for them??

 

Interested in double guage A pillar Caz. Pricing??

 

A Pillars-
Doubles $146.00 plus post



Triples $158.00 plus post



Caz..

 

rotors please~!

ill be boring and go standard

you can send them when you send my silicon woman!

how is that going by the way hmmm?

 

Hi URHYNS, I presume you are talking about the temp sensor adaptors-Z1 and Autometer ?, the temp sensor adaptors are to fit a temp sensor into the top radiator hose.
Yes you will need to cut out a piece of the hose when you fit the adaptor, equal to the length of the adaptor, or it will be too long to fit back in.

I stock a large range of gauges and fittings for them.
You can see some here http://www.cazracing.com.au/catalog/index.php?cPath=41&&page=1
More here
http://www.rocketindustries.com.au/search.php?brand=Autometer&menu=Gauges+%26amp%3B+Access.
Caz..

 

Hi CAZ,

I will take a pic of mine installed and send it to you.

Steve

 

Caz,

Save me one of the battery tied downs, I'll call you friday morning to organise payment.

Steve

 

just wondering what size gauges go into the 'A" pillars caz

 

Hi Simon, The A pillars are designed for the 52mm gauges but the larger 60mm gauges can be fitted with a little modding.
The pod is 70mm across.

Caz..

 

Are those rear rotors bigger??

 

Hi Z32TT, the rotor in the pic is a 324mm, stock rear on a Zed is 296mm. I didnt have a pic of my rear wheel
Caz.

 

Thanks Steve, a pic of the temp sensor adaptor fitted would be great.
I will hold a battery tie down for you

 

would LOVE those rear rotors, but am broke

 

RDA Turbogrooved, Dimpled, Gold passivated Rotors are on a great 'OLYMPIC' Special at the moment 15% off all sizes so long as Aussies keep winning gold at the Olympics :biggrin: , just waiting for mods to put up the post.

 

Polished battery tie downs!

Hey Caz Do u still have any of the polished battery tie downs left?
if u do I will take one. Let me know all the details ASAP
cheers Zedipated:zlove:

 

hey caz. wondering if the top radiator hose for NA (silicon) in red is gone?

 

Caz, how much Vac hose of each size do I need to redo the engine bay?

 

A bit more than what Caz recommends on her web site. I think it was the 4mm I was a bit short on when I did the plenum pull on the silver TT. It was that extra hose from the balance pipe to the charcoal canister that pushed it past the limit.