recently bought a 1995 import first Aust owner.. got this long computer cable in the glove box 1.5 - 2 m. I guess its an ECU connection.. being an import is it possible that it has international connectivity?? Why is it there? What should I be looking for? Any info would be appreciated
ECU connector is about 1.5" long and about 3/4 inches wide. It's normally found near the bonnet release lever.
It's not the ECU plug... I had a quick look at it, it doesn't look factory to me. I reckon that there may have been a piggyback unit or something similar that was kept in the glove box. That's my guess anyway.
its probably and EBC cable check the ECU by taking out the passenger seat floor panel. See if any wires are spliced and cross reference with the EBC installation guide in the tech section. IF the same wires correspond to the guide then there was likely an EBC there. If its and actual piggy back ecu there should be some brand marking on the ECU unit, i think. They way i found out that i had a modified ECU was by first checking if i could rev over 7000 and go over 180km/hr. daz:zlove: have fun!
Thanks guys.. Will have to take it to the track and see what it does....dont think we have anyone down here with a dyno set up.....Looking forward to checking it out as this baby seems to have a bit more poke that my previous Zed
