All the other car wheel mag bore/hub/offsets that suit a z31 - z32 - z33

FOR INFO - FOR ALL NEEDING TO KNOW
Thought this might be useful as its not common

worth a heading buy itself so people add to it here and build the list up right here!
CHEERS -mrtwinturbo

P.S always verify physically all sizes in rims!

Stock TT rims' offset is 45 front and 35 rear
300ZX Z32 TT
Z32 Turbo Alloy Wheels

Wheel size:
16×7.5 with a 45mm offset ? Front
16×8.5 with a 35mm offset ? Rear
66.06mm hub bore
Bolt patten:
5×114.3 (72-87 ft/lb or 105-118nm)
Stud size:
12mm x 1.25
Original front tyre size: 225/50-16
Original rear tyre size: 245/45-16
245/45/16 = 245/40/17 = 245/35/18
225/50/16 = 225/45/17=225/40/18
1992 Z32 Twisty Alloy Wheels (Turbo) (1991)
16x7.5 with a 45mm offset - Front
16x8.5 with a 35mm offset - Rear
Here are some wheel offsets that might work
Front width Standard offset +10mm +15mm
7.5″ (190.5mm) 45.0mm
8.5″ (215.9mm) 32.3mm 42.3mm 57.3mm
9.0″ (228.6mm) 25.95mm 35.95mm 50.95mm
Rear width Standard offset +10mm +15mm
8.5″ (215.9mm) 35mm
9.5″ (241.3mm) 22.3mm 32.3mm 37.3mm
10.0″ (254.0mm) 15.95mm 25.95mm 30.95mm

stock offset is 40mm on S13/S14*

stock specifications
BOLT PATTERNS (Torque spec).
4-lug: 4x114.3 (72-87 ft/lb)
5-lug: 5x114.3 (72-87 ft/lb)
THREAD SIZE: 12mmx1.25

1991 S13 7 Spoke Alloy Wheels (SE Model ones)
15x6 with a 40mm offset

1996 S14 5 Spoke Alloy Wheels (SE Model ones)
16x6.5 with a 40mm offset

1992 Z32 Twisty Alloy Wheels (Non Turbo) (1991)
16x7.5 with a 45mm offset

1992 Z32 Twisty Alloy Wheels (Turbo) (1991)
16x7.5 with a 45mm offset - Front
16x8.5 with a 35mm offset - Rear

Z33 Six spoke 'Track' Wheels
18x8 with a 30mm offset - Front
18x8.5 with a 33mm offset - Rear

Z33 NISMO LM GT4 wheels
18x8.5 with a 25mm offset - Front
18x9.5 with a 25mm offset - Rear

Wheel Specs from other cars that may fit a Nissan
Courtesy of(the man!) SmithSR

Other Nissan Car Specs

Vehicle model('M' = Medium Offset)... model years.. wheel sizes..bolt pattern.. hub bore

NX2000/ Pulsar/ Sentra........'88-00... 13/14".. 4-100 59.20mm
Sentra/ Pulsar FWD..............'83-87....13" ........4-4.5... 66.06
200sx(M)...............................'77-85....13/14"...4-4.5... 66.06
200sx FWD...........................'94-01....13/14"....4-100...59.20
240sx/200sx FWD.................'85-97.....15"....... 4-4.5....66.06
240sx/200sx .......................'88-98.....15/16"... 5-45.....66.06
B210/510/610/710RWD(M). '68-83.....13"........ 4-4.5....66.06
240z/260z/280z/ZX RWD(M).'70-85....14/15"... 4-4.5....66.06
280zx/300zx(M)....................'86-89.....15/16"....5-4.5...66.06
300zx Turbo(M)....................'90-96.....16"..........5-4.5...66.06
300ZX non Turbo(M)..............'90-96.....16"........5-.45...66.06
310 FWD/ F10/ Stanza.........'79-89.....13/14"....4-4.5....66.06
350z(M)................................'03-.........17/18"....5-4.5....66.06
810/Maxima(M)....................'79-84......14"........ 4-4.5....66.06
1600/1800 RWD(M)..............'66-70.....14".........4-4.5....66.06
Altima................................'91-01.....14/15"...... 4-4.5....66.06
Altima.................................'03- .........15/16".....5-4.5....66.06
Maxima.............................. '85-88......14/15"......4-4.5...66.06
Maxima...............................'89-03......15/16".... 5-4.5... 66.06
Sentra................................'01-03......14-"..........4-4.5...66.06
Stanza................................'90-..........13/14".....4-4.5....66.06

Infiniti vehicles:
G20 .....................................'91-................14/15".....4-4.5... 66.06
I30/I35 ................................'95-................15"..........5-4.5....66.06
J30 .......................................'93-................15"..........5-4.5....66.06
M30 .......................................'90-...............15"......... 4-4.5....66.06
Q45........................................'90-03.........15/16/17"..5-4.5....66.06
M45 .......................................'03........ .........18".........5-4.5....66.06
G35........................................ '03................17/18"... 5-4.5... 66.06

Other Manufacturer's specs usefull for Nissan's
No Acura(even though the bolt pattern matches on many)

No Alfa Romeo

Amc uses a 5-4.5 RWD on it's '57-87 Ambassador, AMX, Concord, Gremlin, Hornet, Javelin, Marlin, Pacer, Rambler, Rebel, and Spirit. The AMC Eagle and Spirit 4WD from '75-89 use a 15" 5-4.5

No Audi

No BMW

No Buick

No Caddy

Chevy NovaII from '62-67 uses 13/14" 4-4.5 70.30hub bore
Corvair 4 lug (but not 5 lug) from '60-64 uses 13" 4-4.5 70.30 hub bore
Chevy Sprint from '88-89 uses 12/13" 4-4.5, 59.61hub bore
Older models not included

Other than that, no Chevrolet uses the 4 or 5-4.5 bolt pattern

Chysler:
300M....'97-03....16/17"......5-4.5.....71.50hub bore
Concorde/LHS/New Yorker FWD...'93-.....15/16"....5-4.5....71.50
Conquest RWD...'84-85....14/15".......4-4.5.....67.06
Conquest RWD...'86-94.....15/16"......5-4.5.....67.06
Laser..................'89-........14/15/16"...5-4.5.....67.06
Sebring(excl. convertible)....'95-....14/15/16"....5-4.5.....67.06
Older models not included

No Daihatsu

Daewoo Leganza...'98-....15"........5-4.5.......56.60

Dodge:
Avenger(excl. convertible)....'95-....14/15/16"....5-4.5....67.06
Daytona(laser)......'89-.........14/15/16".......5-4.5.....67.06
Intrepid.................'93-.........15/16".............5-4.5.....71.50
Stealth FWD..........'91-..........15/16"............5-4.5......67.06
Stealth R/T AWD Turbo....'91- .....17".....5-4.5.....67.06
older models not included

Eagle Summit FWD....'89-91....13/14"....4-4.5......67.06
Talon FWD/AWD........'90-......14/15/16"....5-4.5....67.06
TSIFWD/Vision...........'93-......15/16".........5-4.5.....67.06

No Ferrari

No Fiat

Ford:
Crown Vic/LTD RWD.....'90-03...15/16"....5-4.5......70.50
Crown Vic.....'03.........16"..........5-4.5....................70.50
Mustang........'92-03......15-18"...5-4.5...................70.50
Probe............'88-92......14-16".....5-4.5..................59.61
Probe............'93-01......14-16".....5-4.5..................67.06
older models not included

Geo metro from '88-01 used 4-4.5 but with 59.61 hub bore

No Honda(although bolt patterns do match)

Hyundai:
Accent.................'95-99..........13"..........4-4.5.........67.06
Elantra/Sonata....'89-..............14/15"....4-4.5.........67.06
Excel/GLS/Scoupe...'86-...........13/14"....4-4.5.........67.06
Tiburon.................'97-03..........14".........4-4.5.........67.06
Tiburon.................'03................15".... ....5-4.5.........67.06

No Isuzu

No Jaguar

Kia Optima.........'01-03.......14/15"......4-4.5......67.06

Lexus uses too small a hub bore. 60.06.

Lincoln:
Town Car.....'80-94..............15"......5-4.5.......70.50
Town Car.....'95-03..............15/16"...5-4.5......70.50
older models not included

MG: MGA/MGB.....'63-81.......15"......4-4.5......?hub bore

Mazda: many of these hub bores are too small. be advised.
Mazda "6".....'03......16/17"......5-4.5.....hub bore:59.61
rx-8..............'03.......18"..........5-4.5......59.61
323/GLC.......'82-89...13/14".....4-4.5.....59.61
626fwd.........'84-87....14/15"....4-4.5......59.61
626/MX6.......'88-92.....14/15".....5-4.5....59.61
MP3/Protege...'01-03...16/17".....5-4.5....59.61
626/MX6fwd.....'93-.......14-16"....5-4.5.....67.06
929..................'87-........15/16"....5-4.5.....67.06
Millenia.............'95-........15/16"....5-4.5.....67.06
rx7 GSL/GTV......'86-92....15/16'....5-4.5.....67.06
rx7 GSL/GTV Turbo...'86-92..15/16"...5-4.5....67.06
rx7 turbo...........'93-........16/17".......5-4.5......67.06(Medium offset)

No Mercedes

Mercury:
All models from..........'48-54.......15"..........5-4.5.......?hub bore
Gran Marquis.....'89-03.......15/16"............5-4.5.......70.50
Marauder...........'03.............17/18"...........5-4.5.......70.50
older models and models with smaller hub bore not included

No Merkur

Mitsubishi:
3000GT FWD........................'91-01......15/16".......5-4.5......67.06
3000GT Spyder FWd/AWD...'92-01.......15/16".......5-4.5......67.06
3000GT VR-4 AWD...............'92-01........17/18".......5-4.5......67.06
Galant/mirage/Tredia FWD...'83-92.......13/14".......4-4.5......67.06
Diamante..............................'91-03.......15"............5-4.5......67.06
Eclipse FWD/AWD.................'89-03....14/15/16".....5-4.5......67.06
Galant..................................'92-97......14/15".........4-4.5......67.06
Galant..................................'98-03.......15"..............5-4.5......67.06
Lancer OZ.............................'01-03.......15".............4-4.5.......67.06
Starion RWD.........................'84-86.......14/15".........4-4.5......67.06
Starion RWD.........................'87-93........15/16"........5-4.5......67.06

No modern Oldsmobile....get it?

No Opel

No Peugeot

Plymouth:
Laser...........'89-........14/15/16"........5-4.5........67.06
Prowler.......'97-.............18"F/20"R......5-4.5........?hub bore
modern listings only. Older(pre-'80) not included

No Pontiac

No Porsche

Saab:
99/900........'72-86......15"........4-4.5.....?hub bore

No Saturn

Sterling:
825/827/SL........'86-91......15"......4-4.5....?hub bore

Subaru SVX....'91-......16".......5-4.5......56.16

Suzuki uses 60.06 hub bore. While the models Aero and Swift use a 4-4.5 blot pattern, the hub bore is too small to fit the 66.06 Nissan hub. No fit.

Toyota:
most all toyota cars use smaller hub bore than Nissan, hence the wheels no fit! Several cars such as the '75-85 Celica GT RWD use 4-4.5 bolt pattern with a 60.06 hub bore. No fit. Avalon uses 5-4.5 with the same 60.06 hub bore. Again, good bolt pattern, bad hub bore. Others:
Cressida, Corolla RWD, All Supra incl. Turbo use 60.06 hub bore. Every modern Toyota uses 60.06 or even smaller 54.06 hub bore. None will fit the 66.06 Nissan hub.

No VW

No Volvo (65.07 and 67.07hub bore, but the 67.07 hub bore wheels are the wrong bolt pattern)

HOPE THIS HELPS
click thanks if you think it does!

 

Wrong AGAIN!!!
That's for US release fool. Stop posting unless you actually know what you're talking about.
Jspec and Ausspec Zeds came out stock with 16x7.5" +45 offset on all four wheels!

once again, LMFAO @ ^^^

 

As I said earlier - it needs to be double checked / verified - but its a start for a list to be created and improved by members
all patterns should be known anyway - all is good if properly read discussed and debated

chrispy already mentioned the US wheels your late to the discussion - you fool
(is the fool insult really necessary)

you didnt read that bit and dont use the list if you dont want to anyway- I didnt post it for you - i posted it for others they may not have this and want it

I will not post anymore until you tell me when I'm allowed and how many posts i can make each week[TIS]
cheers

 

Hi
I may be way off line here, but do Ford AU and newer wheels fit the 300zx?
The space saver spare for the 300zx, What other manufactures fit the 300zx?
Please reply in laymans english for us other non techheads

 

I agree benny. Fishing for "thanks" its even under his avatar

its almost meaningless anyway.

 

man and i thought i posted some useless crap...

 

:rofl:


Least your useless crap is interesting

You got an approx lead time on those VH exhaust gaskets?

 

drawn them up and awaiting a reply for prices. might end up getting them done on the turret punch.

 

^hahaha I love how the topic of this thread just got completely disregarded

 

Yea to something interesting..

 

changes are just around the corner down here SOR.....

 

Ford vs nisan mags

No - not really
When it comes to holden and ford
The Post Centre Diameter (PCD - which is the stud pattern ) fits.
But as a general rule - the offset (how far the wheels stick out) the hub bore (hole in mag) and lug size(nut) do not.
Yes you can do some strange things to get them on as well as get mods

But they do not really fit.

Best substitutes are other nissan wheels they generally have the same specs
They fit well generally

There is obviously people who disagree - but thats why the car in the video loses it wheels - so each to their own
I go for wheels that fit properly without some mod as generally the mod weakens the engineering principle behind the original design
eg wheels spacers will offset and place more stress on the lug (greater stress on longer length) - sometimes doesnt mean much difference like concentric rings (compressing anything is hard - hence polycarbonate can be used instead of the original cast iron lip)

Lots of people think I 'm a fool as has been stated - but I'm about your age dude, no nappies here so believe what you want

Cheers
P.S sorry your simple question became complicated in these posts

 

no, Holden PCD is 5x120

 

holden 5 X 120

yeh - thats right
adding holden was off the cuff -
cheers

 

dude im pretty sure PCD is Pitch Circle Diameter from memory. am i right chrispy?

 

wouldnt doubt it - cheers for clarifying

you might be right dude - dont know offhand
was just giving him a rough idea
but fair enough - pcd would be whatever you say
cheers dude

 

not being a dick but just double check what you put up on this forum these guys have been working on these things for many years and they will shoot you down.
PS: you have a na right??? not a tt

 

With a hub ring, some wheels off a Ford will fit the Zed, but a lot won't. The usual problem is the X-Factor, which relates to the shape of the spokes of the wheel. Nothing to do with offset. Zeds have very fat calipers and only wheels with high X-Factors will fit. If you want to upgrade the brakes to Brembo, or Akebono, ARP, or whatever, they are larger again and the problem gets worse.

My advice - never buy a wheel off a web site. Go and test fit it at a wheel shop.

 

Im not being a dick but -Ill just say a dick thing

no problem dude

but you are being a dick by asking if I have a NA
TT=Twin Turbo dude

Cheers