Z32 300ZX Brembo Brake Rotor Conversion Bracket

Discussion in 'Technical' started by Painfull, Aug 5, 2019.

  1. Painfull

    Painfull Member

    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    6
    Hi Zeders,

    A while back I started getting together the parts required to upgrade to Brembo calipers on my Z32TT. I have everything except the brackets for both front and rear.

    The Brembo Conversion Facebook page is no more. I have looked at Z1 Motorsports and found the below kit. Would some knowledgeable member please confirm this is the correct kit, and if I can purchase one in Australia? I would be much happier buying it from a member here than a retailer in the U.S.

    Cheers

    This is the 'Front' kit. I can & will also purchase the rear.
    https://www.z1motorsports.com/z1-pr...t-brake-rotor-conversion-brackets-p-5651.html

    [​IMG]
     
  2. Chrispy

    Chrispy Pretentious Upstart

    Messages:
    12,874
    Likes Received:
    361
    Trophy Points:
    83
    Looks correct to me provided you have the correct rotors. The offset on the GTR and 350Z rotors are different.

    I would spend a bit more and get the Brembo calipers to match your rotors as well. The little zed calipers with the big rotors look a bit silly.
     
  3. Painfull

    Painfull Member

    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    6
    Anyone have these brackets. Would like to purchase a full kit please :)
    Front and rear: [​IMG][​IMG]
     
  4. lidz

    lidz Well-Known Member

    Messages:
    1,748
    Likes Received:
    35
    Trophy Points:
    48
    Those brackets aren't used to fit brembo calipers onto a 300zx, they're to fit the larger discs from a 350z (that has brembo calipers) but still retain your stock Nissan 300zx caliper.

    Are you actually wanting to upgrade calipers as well or are you just after bigger rotors & use your stock calipers?
     
  5. Painfull

    Painfull Member

    Messages:
    55
    Likes Received:
    0
    Trophy Points:
    6
    Hi lidz. Thank you for the reply. I do have 350 rotors, front and back, to upgrade the lot. I didn’t mention, sorry.
     
  6. lidz

    lidz Well-Known Member

    Messages:
    1,748
    Likes Received:
    35
    Trophy Points:
    48
    Ah fair enough, your first post mentioned brembo calipers so was getting confused there.

    Think you might have an issue with the rears though, I'm almost certain 350z rear rotors don't fit on z32's. Have a search but pretty sure they don't work with our handbrake.

    You might get lucky with a local set but otherwise I'd just buy those front adapters new via the states
     

Share This Page