17x10 & 17x9.25 LM STYLE MAG WHEEL SET (REPOSTED)

4 used wide wheels & tyres from a 300ZX TT. Some kerb rash on wheels - refer photos.

Right Hand Front Tyre Maxgrade 235/45ZR17 Made in Japan Tubeless Steel Belted Radial Clockwise Rotation Tread 5mm. Wheel Stich S.M. III-17R Made in Japan Hot Size 1780 MR3 Offset +8 with 6.5mm Spacer PCD 114.3 Holes 5 No. 07A98 VIA 690KG 13 degrees. Dent in Rim. Refer next 4 photos.

Left Hand Front Tyre Maxgrade 235/45ZR17 Made in Japan Tubeless Steel Belted Radial Anticlockwise Rotation Tread 4mm. Wheel Stich S.M. III-17R Made in Japan Hot Size 1780 MR3 Offset +13(? illegible) PCD 114.3 Holes 5 No. 97898 VIA 690KG 13 degrees. Refer next 4 photos.

Right Hand Rear Tyre Bridgestone Grid II 255/40ZR17 Made in Japan Tubeless Steel Belted Radial Clockwise Rotation Tread 4mm. Wheel Stich S.M. III-17R Made in Japan Hot Size 1790 MR3 Offset +11 PCD 114.3 Holes 4/5 No. 07A98 VIA 690KG 13 degrees. Dent in rim on back side. Refer next 4 photos.

Left Hand Rear Tyre Dunlop Direnza DZ101 Digi-Tyre 255/40R17 94W Tubeless Steel Belted Radial Anticlockwise Rotation Tread 6 mm. Wheel Stich S.M. III-17R Made in Japan Hot Size 1790 MR3 Offset +11 PCD 114.3 Holes 4/5 No. 07A98 VIA 690KG 13 degrees. Nail penetrating tyre tread - needs removal and repair. Refer next 5 photos.

Inspection welcome. $400

 

So to just confirm you do actually own these, yes?

And that the front rims have different offsets and one requires a spacer.

Got any front or top views so to dictate how much they sit out.

 

Yes, I own them.

Yes, the front rims have different offsets and the spacer is used so they look the same.

No, I don't have top or side views of them on the zed. They look awesome on, but in my opinion the rear tyres protruded slightly beyond the side of the zed's wheel arches.

I drove them around for a couple of years like that and was never pulled up by the cops (but I usually drive conservatively). Two previous owners in Australia also used the wheels, so the fact that they were still fitted when I bought the car is a sign that they are not too extreme.

On rare occasions, say 5 times in all, I heard the tyres clip the body somehow, but I can't recall if that was over bumps or in sharp turns.

I never measured the protrusion as I wanted to feign ignorance if I was ever challenged about them.

Thanks for your inquiry.

 

This is the best picture that I can find showing a rear wheel in relation to the wheel arch (from my avatar).

 

Ok cool thanks. Just what throws it a bit is the details about each rim and the photos looks very yahoo Japanish. So I'm happy you've been so open with the info.

I like this design rim as its very similar to the vs-xx rims we want for our zed. The price is good in comparisons to what you have on offer. Only bit that I don't ideally like is the need for a spacer. Rim set look to be possibly made up of three different sets or at least two. With the rear suiting a wider backed vehicle.

Ill show the minister of finance and see what she thinks. But in the mean time many thanks for sharing.

Cheers.

 

I remember seeing this cars years ago i think, and they are nice looking wheels......suited the car well.....

 

Some close-up photos of the centre covers. The badges are made of plastic and the backing rings are made of metal. The chrome is a bit eroded towards the centre of the backing rings but these could easily be re-chromed. The chrome on the plastic badges is a bit eroded at the bottom of the hexagonal sides and on the bottom flanges (when sitting on a table). I don't know if there is a way of improving the appearance of these chrome sections of the plastic parts.

 

Must clear these out of garage. Price reduced to $200. Located Wembley WA. Mobile 0424 737 025.

 

Wheels Sold 02/01/2014.

Wheels sold 02/01/14.