wheel experts only please ........... Will a 10.5" wheel with an offset of +35 fit on the rear of a t/t without problems Guard lips are rolled,car is dumped low on Tein coilovers and i dont mind running decent camber as the zed is just a toy,not a daily driver
is the positioning of where the wheel bolts to the hub different on a tt opposed to an na??? as in closer or further from the outer guard?
fuel filler,hicas,not positioned different ,more shit inside the wheel well,its the 2 seater erica(fuel tank is in a different position to that of a 2+2) I probably should have explained its a 2 seater t/t :zlove: (and dont ask for pix )
I'll check my rims, I have 275x18x35 on the back= perfect fit! Is the offset marked on the rim? if so i'll have a look.
Mine are 20x10.5, offset is +40 I think. 285/30 tyres, if they were the correct diameter they wouldnt scrub. Shouldnt have an issue with 18's.
rofl,actually you dont and i didnt ask you,i want experts,not ex-spurts Theres 3 zeds here,the ones you are thinking about are for Kathy :zlove:,this is another set im looking at Havent you noticed,everytime i take the zeds out,im running different wheels :biggrin:
hahaha.. your a very funny man. i know i know... you did say aus though.. that includes me ahhh those ones look the goods, definately go with them. but you said they were 10.5 wide to.. so i gathered same same... LOL i was going to say, how many sets can one man have.. btw can i pretty please have a 2k spec bumper and the balance pipe.. yeah you do.. i love it.. constantly changing your mind.. keeps the little ones guessing.
Will fit fine, wouldn't want much than a 295/30/18 on there though. Might scrub your inner guards a little on big bumps, but on the 2 seater thats acceptable. Put a 275 on there if you want a little more clearance. I'm running 38 offset with a 295, and can run up to a 35.
i asked for experts and you came along lol really ,the 3 piece wheels i bought for 3k yesterday weigh less than your head stop looking at old sig pics :bash::F:,wheels from lowzx are in nsw,wheels off the t/t are in tas ,shall i go on lol gee ,where are the chrome wheels ,keep this up mike and ill open the bonnet and blind you (mention my nieces ,you die :biggrin::biggrin
My point exactly Just because it says 'racing' in the name of them, doesn't make them racing rims Weigh the 3peice rims and post the results
hey Simon I'm going to run 10.5 on the rears of my 2 seater ,but I'm going to have upper and lower adjustable arms (so can play with offsets).. still think you need a slight quarter pull to get it to fit ,especially if low
I have 18x10+38s and they sit right under the edge of the guard to the point that if I lowered it I would probably have to pump the guards. I have -1 degree camber on the rear so if you are prepared to go higher than that then you will have more clearance than I. If I were you I'd probably try to get them with a +45 offset in the rear. Gives you a little more room.
I don't think it will fit fine, my rears are 10" +30 and they stick out beyond the guard, currently have 265/30/19, i could get a 275/30 under there. LOWZX i think yours will sit similar to mine as yours are slightly wider, though you have a higher offset. Post pics of the rims and hubs you may be able to machine say 5mm off so it sits better on the car especially as its a 2 seater, more room in the guards. Though having 10.5" rims with 35 offset = perfect dish along with say a 275/30 or 285/30 tyre bit of stretch will = awesome. Just hope there decent rims not that chrome tempe tyres rubbish
