Sold the z a while ago, time for the clean out of left over bits and pieces. I have a pair of fiberglass side skirts for a two seater. I got...
Easy question I spose, with a simple answer. I am curious to know if ba rims will fit on a Nissan. I'm pretty sure the stud pattern is the same,...
Anyone recommend where I can find a rear main seal for a z with a twin turbo and a five speed manual? I was selling it but now I am coming...
Time has come to sell my z. Sad to see it go, I still like driving it around. I was having trouble with it breaking down and it turned out...
It came up during a rwc. The starter motor is loose. I found one bolt so far and tried tightening it up and it must be threaded inside because it...
I bought a new cas when I was having car trouble and it turned out to be the positive battery clamp needed repalacing. It has done about 40 k's. I...
I was having trouble with the cas and I ended up buying a brand new one through ebay. The company is called the import experts. The new one...
I have replaced the cas sensor and the auto elec did the plug and added a pigtail. Maybe there is a break in the wire somewhere that the auto elec...
I have had a few problems for about month now and I figured replacing the cas plug on the wiring loom would fix it. I found that wiggling the cas...
I have finally decided to get a torque wrench. Does anyone know what the torque is for a bolt into alloy? Like a crank angle sensor bolt. Thanks.
I'm a bit concerned about over tightening the cas bolts in case the bolt into alloy rather than steel. It looks like steel, but I want to double...
Well, it's time to do the coil pack connectors. The car was running a bit rough and I got lucky and found out what it was. I thought I had some...
Okay, the crank angle sensor is in and the car is running. I was reading up on timing and I noticed there is a difference between the 90 to 95...
I have been getting a bit of black smoke behind me when I give to the z and I figured it was worth a bit of homework. Someone told me that it was...
I read the tech section on crank angle sensors and it says to mark the cas when you remove it and it takes millimeter precision to reinstall it....
Hi guys. My temp gauge is dead and I had a look under the bonnet. The clip has broken off the top of the sensor next to the water temp sensor. So...
I am losing a little brake fluid. I took it to a brake joint to get a free inspection done and they told me the booster was leaking. I was under...
I had a look in the tech section and the tail lights section is empty. How do I bypass the relay? There are only eight wires so it can't be hard....
I'm looking for a plug off the wiring loom for a crank angle sensor. Nissan tell me that they only come as part of a complete wiring loom. Can...
It seems that my brake lights are coming and going. The centre brake light on the hatch still works like it is supposed to but the standard brake...
Separate names with a comma.