EBC 324mm GTR33 size front rotors, gold passivated turbo, slotted & dimpled

These rotors retail for $647 pair and I have been offered them for $476 pair by the Rep. Minimum 7 sets for this deal. I am close to that number already but if anyone else would like to jump on board, let me know.
NOTE: these are not stock size, you need to already be running an adaptor or a big brake kit.

This will be a quick GB. If you are interested deposit will be required by 17/5, which is 12 days time.
I have heard very good reports on these rotors but they are not widely used amongst us zedders.( I expect their price would have something to do with that!)
The few Zeds that they are on are very happy with them.
Pics and EBC speil below>>

Brake Rotors :Turbo Groove Brake Rotors
-Wide aperture grooves -Special disc alloys UNIQUE to EBC -Dimple hole construction -Balanced geometry The wider slot actually draws cool air across the pad surface keeping pads and rotors cooler. They also expel dust, dirt and hot gases better than fine slots which eventually fill with rust and scale and become ineffective in our opinion. The blind drilled holes break down surface gases when braking from speed but do not weaken the rotor cross section as can happen with through drilling, thereby lessening the chance of rotors cracking over time and heavy use.

PS: freight will depend on your location.
PPS: I will have some solid billet alloy adaptors very soon that will allow you to fit these rotors(and other 324mm rotors) with stock calipers. I dont have a final price on them just yet.
Caz..

 

I am in Caz can you organise the adaptors too please when they are ready and then I can get them all freighted at once. I will pay up front and you can just store the rotors until the adaptors are ready.
Cheers
Rich
0407332944

 

:thumbsup: Count me in as well :thumbsup: as well as adapters. please

 

No worries Richzx and Fate.. :thumbsup:

 

I'm interested Caz pending price on adaptor and frieght

 

how muc do these act weigh?

coz im thinking posage to wa would b a killer:thumbsdown:

 

You know I'm in Caz ...

I have had a pair of these EBC discs in standard Z32 size on my Z for over 100,000km now and have been very happy with them. It's time to upgrade brakes so I am a definite in (rotors only, already have adaptors).

Hope you get to 7 sets Caz! I'll be checking with a couple of others tomorrow.

 

Rotors

Guys, be aware that I placed an order for these rotors two weeks ago to be told that they are out of stock at the factory in England. Maybe you should confirm availability first.
If they are available I will definately be in on the group buy as long as someone can freight them to NZ for me.

Cheers

 

In in too please Caz with adaptors but just two questions?

Can anyone confirm if they will fit with 17" Modena Style wheels? Also at a later date I would like to update to GTST skyline callipers, is that going to okay with these rotors?
Cheers and thanks Caz
Geoff

 

count me in

:thumbsup:for rotors and adaptors please.

 

Hi cruza,I am supplied via Australian EBC distributer, My rep is supplying

direct to me with this one
As far as getting them to NZ I dont see that being a problem as I have business dealings with NZ, so could get them brought over for a reasonable cost..

 

Hi Oni, you need 17" wheels to accomodate these rotors and adaptors,

I should of noted that in the first post,sorry. The adaptors move the caliper out, not forward, so wont effect caliper /rim clearance.I hope that made sence...

Im not familiar with the GtsT caliper so I cant comment on that.
Caz

 

Hi wa_zx, I dont have them here yet to weigh but will enquire about

freight options for WA.
If there were a few of you over there maybe 1 delivery point may be possible??

I will see if we can use EBC's freighters, or WA orders collected from their WA supplier, Qld from Qld's supplier ect.

Caz..

 

Thanks Caz, I'm in

 

Oni, the Skyline Gtst calipers will NOT fit these rotors......

these rotors are 324mm, the Gtst R33 are 296mm and the GtstR34 are 310mm.

The adapters will allow you to fit the 324mm rotors with stock zed calipers. Should you wish to use Gtst calipers later on you will have to buy ANOTHER pair of adapters to step up from 296mm or 310mm to the 324mm rotors in this GB.

If you can get the Skyline calipers at a good price then just purchase the appropriate size rotors (296/310) and you can bolt them straight on (no need for adapters). In either case you will still be upgrading the oem zed brakes (296=+16mm ; 310=+30mm)

 

Thanks Ian :thumbsup:very useful info there, tucked away for future ref.

 

A second set for me please Caz ...

That will be one set for me and one set for Jack (ZXTT-1), both to be rotors only, no adaptors required. Payment for both sets will be coming from me.
Cheers, Mikey.

 

Thanks Mike

 

Thanks Mike I cant wait to get these on my car,exciting stuff :thumbsup:

 

Re: Thanks Mike I cant wait to get these on my car,exciting stuff :thumb

hey caz, how much for the adapters?.. i might get some of these, need new rims.. but ill tuck em away for safe keeping