Hey guys, I'm wrecking the stock motor and have the following available Turbos (good condition) Dumps Cams Cam Covers Polished CAS Good series 1 intake cam gears Exhaust cam gears Upper Plenum Lower Plenum Throttle Bodies and Linkage Spark plug guides Oil pump appears to be new Any oil and water hard lines Nuts and bolts for anything mentioned above Lemme know if you're after anything
Turbos (good condition) $150 Boost Control Solenoids $20 Dumps with heat shields and gaskets $40 Cams $100/set Cam Covers $50/set Polished CAS $100 Good series 1 intake cam gears $50/pair Exhaust cam gears $20/pair Throttle Bodies and Linkage $50 Spark plug guides $20/pair Oil pump appears to be new $20 Any oil and water hard lines POA
Ex cam covers sold, In cam covers dropped to $20/pair As above exhaust cam covers sold to Shane, intake cam covers dropped to $20 for the pair
As new Hydraulic Tensioner and idler pulleys (x2). These have done 0km -they were fitted to the engine as part of a 100k service only to find that the motor had low compression upon completion of the service. $30 for all three.
Bits of the stock motor starting to go, still have the following available Dump pipes including heat shields $50 Exhaust manifolds with heat shields $50 Cams x 4 $40 Cam Covers (Intake only) $20 Good series 1 intake cam gears $40 Exhaust cam gears $20 Throttle Bodies and Linkage $50 Spark plug guides $20 Idle control units $100