All the other car wheel mag bore/hub/offsets that suit a z31 - z32 - z33

Discussion in 'Technical' started by MrTwinTurbo, Dec 4, 2010.

Thread Status:
Not open for further replies.
  1. ezzupturbo

    ezzupturbo JDMAutomotive

    you just dont see many turbo zeds without intercooler air holes in the front bar. just going off your garage pic.
     
  2. MrTwinTurbo

    MrTwinTurbo Account Disabled

    yeh - its original still

    Yeh stock fairlady front - as original

    cars under mod transform - new bars going on
    first pic is before shot and the only shot at moment

    i'll post some decent photos up soon as put the mods on
    cheers dude
     
  3. GOTTAGO

    GOTTAGO New Member

    You say you Z is Twinturbo but your front bar say otherwise and I dont see a front mount??????????
     
  4. MrTwinTurbo

    MrTwinTurbo Account Disabled

    WTF? - Its a stock bar dude
    sorry you not see the mount???

    I'll take a pic of engine bay just for you and post on garage tommorow
    just for you!

    OMG - some really strange statements considering its a stock fairlady front
     
  5. ezzupturbo

    ezzupturbo JDMAutomotive

    yea its a stock na front bar
     
  6. ezzupturbo

    ezzupturbo JDMAutomotive

    [​IMG]

    stock tt front bar see the ducts for the coolers down the bottom.
    [​IMG]
     
  7. Chrispy

    Chrispy Pretentious Upstart

    You sure are ;) Let me know when you need $$ too.


    And where's your coolers MrTwinturbo?
     
  8. ezzupturbo

    ezzupturbo JDMAutomotive

    he could have a stealth front mount..
    Will do..
     
  9. gmbrezzo

    gmbrezzo Moderator

    If you are talking to me, then yes mine is an NA
    It was just a simple question as I do not have a spare. The car came without one.
    So just trying to find out if a ford space saver spare would fit.
     
  10. MrTwinTurbo

    MrTwinTurbo Account Disabled

    Dudes - omg -you all dont know what your talking about

    OMG - DUDES! YOUR ALL WRONG!
    YOU ALL KNOW NOTHING!
    OMG - talk about condescending arrogant rude ignorant disbelieving people.

    trust me on this - I will prove it by lots of picture for you over the next few coming weeks! I dont need $ dude - wtf??

    The bar pictured in the link the other wrong dude provided is the common bar for the TT

    My car in the picture(red one) was owned by a japanese interpreter who worked for Nissan
    He was given a work car (same car) and he garaged this and used on weekends in his own time. As he was a Nissan Executive the car was fully serviced by Nismo throughout, Nissan then gave him the Z33 work car and took back theirs and was offered a huge discount and to upgrade his own personal car to the Z33 (nissan strongly enourages their execs to drive their latest car only), he did that and so the Z32 Fairlady TT 2+2 become extra and so it was sold to me through a friend that works for Nismo in Australia. I bought it with 64,000kmh on the clock two years ago.

    My car has the other bar that was fitted for the TT but is not very common except on N/As - the last guy is correct - they are stealth mounted
    My intercoolers are centre behind the radiator
    My (nismo fitted) oil cooler is centre bottom

    Dudes - stop being nasty disbeleiving condescending and disrespectful (at my age its disrespectful to get it from 17 yr olds) it doesnt look good in public domain - stop embarrasing yourselves by your nasty sarcastic comments and try being nicer in your debates/ disbelief etc - we all own zeds - they are all cool regardless of colour and not everyone has the same car parts

    Standby to be proven wrong
    You all get my goat up telling me i'm a lier and I dont own what I said own!

    I'm wondering why you all are acting like idiots? I don't think you are so wondering why you acting like it - are you doing this witch hunting thing that some people have said they do where some people follow the posts looking to persecute someone by intimidation and bullying?

    http://yfrog.com/jvoldpicofrearj

    http://img715.imageshack.us/img715/2030/oldpicofrear.jpg

    a target='_blank' href='http://img715.imageshack.us/i/oldpicofrear.jpg/'><img src='http://img715.imageshack.us/img715/2030/oldpicofrear.th.jpg' border='0'/></a>

    http://yfrog.com/5dmyttproofj

    http://img193.imageshack.us/img193/7808/myttproof.jpg

    <a target='_blank' href='http://img193.imageshack.us/i/myttproof.jpg/'><img src='http://img193.imageshack.us/img193/7808/myttproof.th.jpg' border='0'/></a>

    Uploaded with <a target='_blank' href='http://imageshack.us'>ImageShack.us</a>


    STILL THINK YOU ALL KNOW WHAT YOUR TALKING ABOUT???
    STUPID/IDIOTS/FOOL/ IS THE WORDs YOU ALL USE!

    CHEERS
     
  11. MrTwinTurbo

    MrTwinTurbo Account Disabled

    note the z31 fairlady in the back ground with the bump in the hood

    NOTE :::: z31 fairlady in the back ground with the bump in the hood (Turbo too if you dont believe me)

    WELL THATS MINE TOO! IVE OWNED IT FOR 6 YEARS

    CHEERS
     
  12. MrTwinTurbo

    MrTwinTurbo Account Disabled

    I have a spare wheel/s?

    Hey dude - dont you have the stock spare or is that different size ( mags look taller) - I might be able to help you out

    Dont worry about it mate - they were talking about mine not yours
    Having NA is not as good but i wont give you shit - its a Z
    AND Z's are cool!

    ANY Z is better than no Z dude!

    Cheers and Sincere Regards
     
  13. murci

    murci Member

    Havnt been following this too much but i do know that your over reacting.


    I think the reason why members are so negative to you is because you came on here guns-a-blazing and started to encroach. I think i told you this in a previous thread but you obviously havn't taken it on-board.

    just calling it how i see it mate. A little less vocal and a little more respectful to some of the veterans on here will do wonders.


    cheers,
    matt.
     
  14. MrTwinTurbo

    MrTwinTurbo Account Disabled

    thanks for the concern dude - its ok

    im not overreacting dude - being negatives one thing - calling me a flat out liar and a poor wannabe is differentencroaching..... i do understand what your saying but its a jealous and selfish term - we are all trying to help out - no one owns any posts here- even the author has no control as ive even watched my thread being hijacked already by the ones you are talking about - it was a serious post i was hoping to develop with members and now its full of shit
    yeh - im guilty dude - im a guns blazing type of guy so I did and do always take it onboard contrary to your statements, I always listen and did listen to your order - its just my character dude - I cannot change it even if i tried as a have a high metabolism- im a guns blazing metabolism so I will never change no matter how much you try or regardless of what you say - its me and you either accept it or you dont but im not gonna apologise for who I am - so Im sorry im a guns and blazing type of guy - take it all with a grain of salt
    like you said you havent been following this too much so why give advice on something you havent been following - just calling it how I see it , just like you
    Being called a liar dude etc is not overreacting. Respect is not bestowed upon anyone it is something you continually earn says (I had that line rammed down my throat for years by the Army - LOL)

    Anyway - I do appreciate your advice and your concern and take on board your comments once again. I will try to be less vocal as you suggest - i think thats good advice - I am a vocal type of guy that likes to party or get excited over a z - like someones motto said - do you feel like a kid with an icecream when you see a zed. Well yeh I one of them dudes.
    Your concern gives me the impression your a cool dude at heart with all types of people anyway
    so cheers matt - thanks, merry xmas and safe happy zedding
    Jamie
     
  15. murci

    murci Member

    lol, i was about to say..your ex military. I know what you saying, i get it. But all i was saying is you cant come into something temperamental(this forum) with an abrasive attitude and expect it to be smooth sailing :)

    When i say i havnt been following. I mean that i have..but it doesn't bother me like it bothers other people. No one on here has insulted you or said anything bad without provocation.
    ..and when i say provocation that includes making stupid caps lock heavy titled threads about ridiculous things.

    If thats your cup of tea then you have to take the bad with the good. Else, dont post :)

    either way, the drama is still amusing :D maybe arashi will chime in and then this thread will have insta 200 replies overnight... bah we can only hope ;)
     
  16. MagicMike

    MagicMike Moderator Staff Member

    FYI Chrispy wasn't saying that you need $, he was talking to ezup about much more zed related topics.

    And about your attitude...

    I suggest you have a look at some of the history of some of the members you are insulting. Piss these guys off and you can kiss any help goodbye. Not only that, be prepared to get flamed the next time you post something stupid (guessing about 2mins)...
     
  17. mungyz

    mungyz Well-Known Member

    Posted in the thread this all started:

    So Mr Twin Turbo

    I see you have no come back here as you are clearly wrong yet you wonder off in to the other thread you started and start having a crack at anyone who dares disagree with you :confused:

    You have still not shown us what qualifications you have in this field and you have made even more errors in your advice/comments.

    I will give you some advice:

    MAN UP! Admit you were wrong on some counts, apologise for acting a dick (even if you don't think you were) and move on.

    Think of this as a club room rather than a forum, how long do you think you would have lasted had all this been a conversation face to face? I would say your face would look a touch shabby by now & it would be your own fault.

    Mods can I suggest we remove the content trashing that previous thread and throw it all in here, then chuck it all in non tech for a bit, then once Mr Twin Turbo has had his ritual "idiot joins the forum and posts crap everywhere" beating we can delete it all and move on :D
     
  18. gmbrezzo

    gmbrezzo Moderator

    Hi.
    Some forums will get you flamed just for typing two letters.
    this place is just not that way.
    I suppose act like an idiot and you get what comming
    I have found everyone here very helpful, no egos (at least they don't show it)

    I am happy with the NA. Less parts = less problems and a bit more space to work on.
    Anyway back on subject:
    the mags on mine are 18" with 215x40 tyres Std nissan calipers (wish they were brembos)
    You have a spare? where are you located and how much?
    Regards
    Graham
     
  19. MrTwinTurbo

    MrTwinTurbo Account Disabled

    spare rim

    no mate - i meant spare rim as in spare rim (yellow) not one of your spare mags - sorry
    im in the ridge -
    most people ive met are helpful here - i agree
    dont know about the ego part though - lol
    cheers graham
     
  20. Chrispy

    Chrispy Pretentious Upstart

    Lolzy lolzy :rofl:

    We all know nothing? If find that a little hard to believe :p And don't worry, I wasn't going to be sending you money, that's for Chris who is making me some exhaust gaskets for the V8 in my Zed.

    Behind the radiator?? Pics or it didn't happen. Not calling you a liar (;)), but there is no room behind the radiator between the rad and the cooling fan for them to fit. I can clearly see in your engine bay piccy the standard radiator, standard air con condensor and standard fan shroud. This will give you approx 30mm between fan blades and rad.

    It is also very bad practicable to put a intercooler behind a radiator due to the very high air temps coming off it.

    You can also see the standard intercooler pipework near the rad support which goes down to each side of the bumper for the SMIC's, which I think there is a 95% chance thats where they are. $10 the car had a front end smash and they guys who fixed it didn't give a damn and put on a NA front. No ambient airflow to the 'coolers = bad! That front did not come with your zed as standard, don't care who says what. You have a standard TT that's for sure, HICAS and all the other stuff is there.

    And you're 'nismo' oil cooler is standard fitment directly in front of the radiator. Actually I've never seen Nismo make a oil cooler for the Zed, haven't really looked though.


    Lol! 17 year olds? Where? Matt's young, but not that young. He's also got 2 zeds (NA and TT).

    Ezzupturbo is one of the best zed mechanics in WA and has done a VQ30DET engine conversion into a Zed, he isn't 17.

    Mungy is one of the best Zed mechanics in NZ and has rebuilt plenty of zeds, and complete restos on some, he wishes he was 17 :p

    I've been playing with zeds for a while, worked on more than I can count and onto my 2nd and 99% finished a VH45 V8 engine conversion. I wish I was 17 too, the girls were hotter back then ;)

    We ain't idiots ;)

    I know you're an older bloke, and you know quite a bit of stuff which is great. You want to help which is great, but ease into it a bit. I didn't just rock up on the evo forums and started whoring out the place. I was lurking here for nearly a year before I even signed up! Take it easy, learn who's who, read a lot, read the tech section if you haven't seen that yet lotta gold in there.
     
Thread Status:
Not open for further replies.

Share This Page