Z1 Coolant temp sensor adapter [CLOSED]

The adaptor is 25mm, if you have a look at your stock top radiator hose you will notice is drops in size in the middle. this part of the pipe is 25mm so thats why they have made it in only this size. does not come in any other sized. so you will obviously need a stock top radiator hose for this adaptor to work...

looks good, angled, will flow with the stock look






PRICE: $30 each landed to me in aust. pickup from me or im guessing it would only be like $5-10 postage to all other states.


EOI LIST:
1. CHAD
2.
3.
4.
5.
6.
7.
8.
9.
10.

if we get more then 10 then i will work out price again.

 

good man chad :zlove: :zlove:

EOI LIST:
1. CHAD
2. hot300zx
3.
4.
5.
6.
7.
8.
9.
10.

 

PZP have these talk 2 tom

 

just one question i had a 34 mm diamater one fitted that worked well but it was staight and this curved on will be better

EOI LIST:
1. CHAD
2. hot300zx
3.Western Z
4.
5.
6.
7.
8.
9.
10.

 

me in to

EOI LIST:
1. CHAD
2. hot300zx
3.Western Z
4.BoneZx
5.
6.
7.
8.
9.
10.

 

we all have straight ones now,this will be a better fit as it wont crimp the hose like the current ones

 

yeah thats the problem i had with the staight one , but what about diamater size the straight one says 34mm on it and fits nice.

 

i'm in too .. do not know which size, yet ...

...

 

Put me down too

Originally Posted by BoneZx
EOI LIST:
1. CHAD
2. hot300zx
3.Western Z
4.BoneZx
5.black baz.
6.stef
7.
8.
9.
10.

 

Put me down too

 

I'm in, good work chad!

EOI LIST:
1. CHAD
2. hot300zx
3.Western Z
4.BoneZx
5.black baz.
6.stef
7.wooly1953
8.beaver
9.
10.

 

EOI LIST:
1. CHAD
2. hot300zx
3.Western Z
4.BoneZx
5.black baz.
6.stef
7.wooly1953
8.beaver
9. Joe
10.

 

I've got the one that Fleet supplies (straight config). The thread size on that one isn't the best for autogauge gauges that I got. (from Auto Tech Auctions)

 

Will this fit with a replacement

silicon top hose?
if a definate yes, im in....if not sure ill have to give it a miss....

 

whats the inside diameter of your silicon hose ross ?

 

put me down for one too. So long as it'll be fine for the stock non-turbo top rad. hose then all's sweet

 

no idea, i haent got it yet!!!

but i was intending on getting blue samco brand hose.....

 

ive got some on order as well and they would have to have the same diamater as the standard hose surley.



.

 

they would have to be the same or they wont fit the radiator or water pipe necks,have you a link to what you got ross ??

 

If the product comes from Z1 I have no doubt that it fits, I like the idea of the angle, but this ID figure of 25mm concerns me. Firstly, Chad's comment:

Secondly, the item as listed on Z1's website does not mention this 25mm diameter anywhere; neither does it specify that a stock top hose is needed.

I have an SFS silicone top hose, ID is 34mm at one end and 40mm at the other. No way does it reduce to a 25mm ID inbetween. I also have a 34mm straight adapter, not yet fitted, which is a perfect fit in the 34mm section. I would prefer to use this Z1 unit in the SFS hose - if it fits!

Given that Z1 also sell Samco and Z1 branded silicon top hoses, Chad, as the GB organiser, perhaps you could email Z1 and clarify whether or not these adapters will work with the silicon hoses? If you've already done that, and this has prompted your comments, could you please make that clear?

Cheers, Mikey.