Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $300 ONO Bad photo, looks way cleaner then this Chrome Interior Door Handles $230 (inc. post) Nistune ECU - flashed with a MT NA tune , swap the *.bin out to suit your z32 $220 BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $80 Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff Two B-pillar (j-spec with belt holes) $30 PRICES EXCL. Freight, for big items, please organise freight options else pickup preferred on the bigger items. S1 A/C, C/C Pod and AMP $130 ONO S1 A/c Pod $30 S1 A/C pod (missing hazard light) $20 Full lockset $100 knob & handbrake leathers $20 for the pair Rear view mirrors , both in good nick $15 ea. Boot/Fuel release mechanical lever $10 HKS mushroom pod adapter $35 looks like this on the left(sorry about the picture)
if i get other interested parties for other bit of interior bits sure just the fronts mate, no holder
oneman, shouldnt be anymore then $30 (prob around the 25$ mark with allied express). nistune sold chrome handles 220 incl. registered post open to reasonable offers
been busy at work. will take some photos for interested member via pm before you. currently stuck behind a river flooding >.<
Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO Chrome Interior Door Handles (inc. post) SOLD Nistune ECU - SOLD BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $80 Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff Two B-pillar (j-spec with belt holes) SOLD S1 A/C, C/C Pod and AMP $110 S1 A/c Pod $30 S1 A/C pod (missing hazard light) $20 Full lockset $100 knob & handbrake leathers $20 for the pair Rear view mirrors , both in good nick $15 ea. 1 Sold, 1 left! Boot/Fuel release mechanical lever $10 HKS mushroom pod adapter $20
Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO Chrome Interior Door Handles (inc. post) SOLD Nistune ECU - SOLD BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $70 Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff Two B-pillar (j-spec with belt holes) SOLD S1 A/C, C/C Pod and AMP $100 S1 A/c Pod $25 S1 A/C pod (missing hazard light) $20 Full lockset $90 knob & handbrake leathers SOLD Rear view mirrors , both in good nick $10 ea. 1 Sold, 1 left! Boot/Fuel release mechanical lever $10 HKS mushroom pod adapter $20 Regrettably selling the pair of handles I was going to keep for myself. Don't know when I'm going to find more, so another pair of chrome handles $210 delivered Rear side "clear" markers from rob260 $40 4x Green EL-Panel's (perfect for altia rear panels) $10 each 3x Bosch Drive Belts $50
ok so i missed out on the handbrake boots maybe better luck on scoring a green el panel off ya instead, haha. post to 4215 please??
Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO ^^^^ WILL SPLIT THE TRIMS $150 and $100 for seats OR $230 for both Chrome Interior Door Handles (inc. post) SOLD Nistune ECU - SOLD BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. SOLD PENDING PAYMENT Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff Two B-pillar (j-spec with belt holes) SOLD S1 A/C, C/C Pod and AMP $90 S1 A/c Pod $20 S1 A/C pod (missing hazard light) $15 Full lockset $80 knob & handbrake leathers SOLD Rear view mirrors , both in good nick $10 ea. 1 Sold, 1 left! Boot/Fuel release mechanical lever $10 HKS mushroom pod adapter $20 Regrettably selling the pair of handles I was going to keep for myself. Don't know when I'm going to find more, so another pair of chrome handles $180 delivered Rear side "clear" markers from rob260 $40 4x Green EL-Panel's (perfect for altia rear panels) $10 each (1 sold, 3 left) 3x Bosch Drive Belts $40
infill panel hey mate, if the infill panel doesnt sell, i will take it. i am in brissy so can pickup anytime. cheers.