QLD Frytech's sell out

Discussion in 'Car Parts for Sale or Wanted' started by frysie, Feb 23, 2013.

  1. frysie

    frysie FRYTECH

    Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $300 ONO
    [​IMG][​IMG]
    [​IMG]
    [​IMG]
    [​IMG][​IMG]
    [​IMG][​IMG]
    [​IMG][​IMG]
    [​IMG]
    Bad photo, looks way cleaner then this
    [​IMG]


    Chrome Interior Door Handles $230 (inc. post)
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]



    Nistune ECU - flashed with a MT NA tune , swap the *.bin out to suit your z32
    $220
    [​IMG]
    [​IMG]


    BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $80
    [​IMG]
    [​IMG]

    Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff
    [​IMG]

    Two B-pillar (j-spec with belt holes) $30
    [​IMG]
    PRICES EXCL. Freight, for big items, please organise freight options else pickup preferred on the bigger items.

    S1 A/C, C/C Pod and AMP $130 ONO
    [​IMG]


    S1 A/c Pod $30
    [​IMG]

    S1 A/C pod (missing hazard light) $20
    [​IMG]

    Full lockset $100
    [​IMG]

    knob & handbrake leathers $20 for the pair
    [​IMG]

    Rear view mirrors , both in good nick $15 ea.
    [​IMG]


    Boot/Fuel release mechanical lever $10
    [​IMG]


    HKS mushroom pod adapter $35
    looks like this on the left(sorry about the picture)
    [​IMG]
     
  2. ProckyZ89

    ProckyZ89 Senior Member

    Would you split interior?

    And s1 lights pod is it just the front or the full pod (holder and front)
     
  3. frysie

    frysie FRYTECH

    if i get other interested parties for other bit of interior bits sure

    just the fronts mate, no holder
     
  4. onemancrew

    onemancrew New Member

    Im interested in the infill panel..

    How much would it be to ship that to Sydney?
     
  5. frysie

    frysie FRYTECH

    oneman, shouldnt be anymore then $30 (prob around the 25$ mark with allied express).

    nistune sold


    chrome handles 220 incl. registered post

    open to reasonable offers
     
  6. zed kelly

    zed kelly New Member

    i recon im keen on these knob & handbrake leathers $20 for the pair............4215, cheers mate.
     
  7. zed kelly

    zed kelly New Member

    btw.......inbox is full mate!
     
  8. pennyarvs

    pennyarvs New Member

    Reminding you about the photos, Clayton. Thanks...


    AAA
     
  9. zed kelly

    zed kelly New Member

    ............or maybe not haha!
     
  10. frysie

    frysie FRYTECH

    been busy at work. will take some photos for interested member via pm before you.

    currently stuck behind a river flooding >.<
     
  11. zed kelly

    zed kelly New Member

    all good mate, yeh thinking of trading the zed for a jetski atm......
     
  12. frysie

    frysie FRYTECH

    Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO

    Chrome Interior Door Handles (inc. post) SOLD

    Nistune ECU - SOLD
    BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $80

    Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff

    Two B-pillar (j-spec with belt holes) SOLD


    S1 A/C, C/C Pod and AMP $110


    S1 A/c Pod $30


    S1 A/C pod (missing hazard light) $20


    Full lockset $100

    knob & handbrake leathers $20 for the pair


    Rear view mirrors , both in good nick $15 ea. 1 Sold, 1 left!

    Boot/Fuel release mechanical lever $10


    HKS mushroom pod adapter $20
     
  13. frysie

    frysie FRYTECH

    Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO

    Chrome Interior Door Handles (inc. post) SOLD

    Nistune ECU - SOLD
    BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. $70

    Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff

    Two B-pillar (j-spec with belt holes) SOLD


    S1 A/C, C/C Pod and AMP $100


    S1 A/c Pod $25


    S1 A/C pod (missing hazard light) $20


    Full lockset $90

    knob & handbrake leathers SOLD


    Rear view mirrors , both in good nick $10 ea. 1 Sold, 1 left!

    Boot/Fuel release mechanical lever $10


    HKS mushroom pod adapter $20

    Regrettably selling the pair of handles I was going to keep for myself. Don't know when I'm going to find more, so another pair of chrome handles $210 delivered

    Rear side "clear" markers from rob260 $40
    [​IMG]

    4x Green EL-Panel's (perfect for altia rear panels) $10 each
    [​IMG]

    3x Bosch Drive Belts $50
    [​IMG]
     
    Last edited: Mar 3, 2013
  14. pennyarvs

    pennyarvs New Member

    Do the EL panels come with inverters?
     
  15. frysie

    frysie FRYTECH

    I thought i Had a spare 1 or 2 but cant find them :S so no they dont sorry
     
  16. zed kelly

    zed kelly New Member

    ok so i missed out on the handbrake boots maybe better luck on scoring a green el panel off ya instead, haha. post to 4215 please??
     
  17. frysie

    frysie FRYTECH

    pm sent . thanks :)
     
  18. frysie

    frysie FRYTECH

    Full tweed interior (glovebox, centre console, rear front trims, door cards and the door bit above for door mounted seat belts, rear bench seat, drivers electric with a slight bolster tear (easily fixed), and manual excellent condition passenger seat). Also I have the two little plastic bits that go on the door cards (for seat belt in a box somewhere). $250 ONO
    ^^^^ WILL SPLIT THE TRIMS $150 and $100 for seats OR $230 for both

    Chrome Interior Door Handles (inc. post) SOLD

    Nistune ECU - SOLD

    BROKEN in-fill panel, can be plasti-welded at rear and then a fine bit of black vinyl tape and it will be hard to tell. SOLD PENDING PAYMENT

    Two b-pillar door plastic trim bits (above door card) $30 slight bumps in vinyl stuff

    Two B-pillar (j-spec with belt holes) SOLD


    S1 A/C, C/C Pod and AMP $90


    S1 A/c Pod $20


    S1 A/C pod (missing hazard light) $15


    Full lockset $80

    knob & handbrake leathers SOLD


    Rear view mirrors , both in good nick $10 ea. 1 Sold, 1 left!

    Boot/Fuel release mechanical lever $10


    HKS mushroom pod adapter $20

    Regrettably selling the pair of handles I was going to keep for myself. Don't know when I'm going to find more, so another pair of chrome handles $180 delivered

    Rear side "clear" markers from rob260 $40


    4x Green EL-Panel's (perfect for altia rear panels) $10 each (1 sold, 3 left)


    3x Bosch Drive Belts $40
     
  19. frysie

    frysie FRYTECH

    need the rest gone. make an offer!
     
  20. dbscomp

    dbscomp New Member

    infill panel


    hey mate, if the infill panel doesnt sell, i will take it. i am in brissy so can pickup anytime. cheers.
     

Share This Page