The passenger side cylinder at the rear of the engine was low in compression. It read 110PSI, after dropping in a bit of oil and retested it read...
Update Performed a compression test and yes one cylinder did have alot lower compression. I dropped in a bit of oil, retested and compression...
Also... occasionaly I notice that I need to refill the radiator by about half a cup of water? There is no evidence of water leakage anywhere.
Just checked the oil. It does seem to be very runny/watery and is hard to tell but is a little chocolatey. How could water get in the oil?...
Oil level is fine. Oil pressure reading seems fine. There is also no noticable loss of power. I will do the compression test.
What would cause the buildup of crank case pressure and cause the dipstick to pop off? I have replaced with brand new PCV valve and hosing, yet...
Here is some more detail: About a week ago the dipstick popped out and spewed oil, causing white smoke (burning oil) to come from the passenger...
I am having this exact same issue. White smoke coming from brake fluid area. Did you ever fix this? If so what did you do?
Traction Control My zed already came with the Racelogic Traction Control unit when I purchased it. I rarly use the launch control feature as I...
Is it normal for datascan to constantly report the A/F Ratio as Lean or Rich?
I have purchased and installed one of these kits. Huge thankyou to K-Zed for quickly organising and posting this kit over X-mas. The email...
Fan shroud What process did you use to smooth the fan shroud? Sand then paint?
Email sent.
Thanks K-Zed Well that is definitely my problem. I have just done a search on 'voltage regulator' and have found other similar posts. Is the...
Separate names with a comma.
