Still for sale:br:
Still for sale, offers welcome
I read the stickies and hope I'm not doing anything wrong:o If so let me know or close the thread. Some of you may remember this manifold from...
Can't edit my post but wanted to add that we're probably not fully understanding each other. We can discuss this for ages but the whole oil...
You know it soooo much better you don't even know how to explain why:rolleyes:
The additives that you poor into the engine apart from regular oil were not designed to work with that particular oil. It's highly questionable...
Fill it up with a diesel oil, they're ment to eat away crap faster like what got into your valve lifters. A thicker oil grade will reduce...
Well I figured it to be much easier to swap this newer CAS with the older CAS fitted to a friends 300zx. I don't think he'll mind getting a newer...
Have you swapped the injector from another cylinder? Would rule out the injector itself. If it ticks but not that powerful as the rest and it...
I managed to get the car back to stock, easier said than done. During the assembly I somehow managed to make a stupid mistake, the injector plug...
It's possible to use the OEM plate but most swap to the AEM plate as it'll run much better. For some reason, the AEM ecu doesn't like the stock...
I need to put an AEM trigger wheel into my CAS but the newer style CAS seems to be non-serviceable. It looks like the sleev covering the trigger...
If you go with a complete cam job solid lifter cams are a good choice. The advantages of the solid lifters play out easily against the costs.
The basic rule of thumb with turbocharger manifolds is that equal length doesn't matter for the scavenging of the cylinders. The turbine works as...
The stock manifolds are not really 'good', they are hard to improve due to the turbine inlet placed so close to the last cylinders. An unequal...
A 'log' manifold is quite a wide statement, just cause it's a one piece item doesn't make it bad. However, in order to fit the turbo's within the...
Due to the length (as far as there is any on the OEM's) there's hardly anything to screw up with going to 'larger' manifolds. But the best...
You sure those are Nissan part numbers? I don't remember seeing Nissan OEM parts listed with a letter within the first 5 numbers. Parts list:...
This could be the result of a bent shift rod and/or fork, though I've never seen that happen to a vg30 tranny. Another cause could be in the...
I wasn't able to do a base run cause when I got the car too much was wrong with it. Required a plenum pull to start from. The engine performance...
Separate names with a comma.