can someone tell me where

the stock boost pressure sender is for the gauge in the speedo?

 

Up Near the brake booster.

Is the rectangular black box maybe 3" x 2" with only 1 Vaccum line connected at the bottom and the wiring plug.

 

yeh its just behind the small fuse box on the drivers side, it;s bolted

onto the sidewall and is a small black box..

 

Got a spare here you can have too if having trouble with yours :thumbsup:

 

not having a problem with it

but thanks for the offer markos.

i have an over boosting problem with my avcr. i just wanted to swap the pressure sensor of the acvr with the stock line and see if this makes a differnce.

do u know where its fed from? my avcr pressure line is fed between the balance tube between the fuel rail diffuser.

my dash boost gauge reads +7mmhg while acvr says im boosting to 0.77 (or 11psi)

hm...

cheers for the quick replys guys

ryan

 

Re: not having a problem with it

believe the avcr.. the stock guage is shite

if your worried whack another quality boost guage in

ive got my boost guage (stock) tapped in just under infront of the throttle plates (i like to see it at 0 at idle)