Howdy Doodie, Notice my left fog light hanging out of the socket yesterday and on closer inspection all the screws were missing and the fibreglass where they were screwed was broken. Can anyone suggest how to fix this problem. Please note I have no experience or knowledge on how to fibreglass.
Isn't that your L/H blinker? It sure looks like it. It looks like the screws have been put straight into the F/glass, not a good idea. You need to by a few small panel clips (Autobarn or similar, will have them), two for each light. They are "U" shaped steel clips, and push onto the edge of the F/glass (where the screw holes are), then your screws, screw into them, and not into the F/glass. The front edge of your lights should hook into the edge of the hole in the bumper, and then you fit the screws into the back edge off the lights(don't tighten them too much).
Thanks lloyd....and yes it's the blinker, only realised I said fog light after posting and couldn't be bothered changing it. I knew you guys would see the pics anyways.
Or if you're not any good with fibreglass, use that 5 minute epoxy putty, sets like concrete, is easy to use and is paintable!
